Table of Contents

 

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 


 

Form 10-Q

 


 

(Mark One)

 

x      QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended September 30, 2010

 

or

 

o         TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from          to

 

Commission File Number: 001-15957

 


 

Capstone Turbine Corporation

(Exact name of registrant as specified in its charter)

 

Delaware

 

95-4180883

(State or other jurisdiction of
incorporation or organization)

 

(I.R.S. Employer
Identification No.)

 

21211 Nordhoff Street,
Chatsworth, California

 

91311

(Address of principal executive offices)

 

(Zip Code)

 

818-734-5300

(Registrant’s telephone number, including area code)

 


 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x   No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o  No o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer o

 

Accelerated filer x

 

 

 

Non-accelerated filer o

 

Smaller reporting company o

(Do not check if a smaller reporting company)

 

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes  o   No x

 

The number of shares outstanding of the registrant’s common stock as of October 31, 2010 was 246,666,165.

 

 

 



Table of Contents

 

CAPSTONE TURBINE CORPORATION

INDEX

 

 

 

Page
Number

PART I — FINANCIAL INFORMATION

 

 

 

 

Item 1.

Financial Statements (Unaudited)

3

 

 

 

 

Condensed Consolidated Balance Sheets as of September 30, 2010 and March 31, 2010

3

 

 

 

 

Condensed Consolidated Statements of Operations for the Three and Six Months Ended September 30, 2010 and 2009

4

 

 

 

 

Condensed Consolidated Statements of Cash Flows for the Six Months Ended September 30, 2010 and 2009

5

 

 

 

 

Notes to Condensed Consolidated Financial Statements

7

 

 

 

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

20

 

 

 

Item 3.

Quantitative and Qualitative Disclosures About Market Risk

30

 

 

 

Item 4.

Controls and Procedures

30

 

 

 

PART II — OTHER INFORMATION

 

 

 

 

Item 1.

Legal Proceedings

31

 

 

 

Item 1A.

Risk Factors

32

 

 

 

Item 2.

Unregistered Sales of Equity Securities and Use of Proceeds

33

 

 

 

Item 3.

Defaults Upon Senior Securities

33

 

 

 

Item 4.

[Removed and Reserved]

33

 

 

 

Item 5.

Other Information

33

 

 

 

Item 6.

Exhibits

34

 

 

 

Signatures

35

 

2



Table of Contents

 

PART I — FINANCIAL INFORMATION

 

Item 1.  Financial Statements

 

CAPSTONE TURBINE CORPORATION AND SUBSIDIARY

CONDENSED CONSOLIDATED BALANCE SHEETS

(In thousands, except share amounts)
(Unaudited)

 

 

 

September 30,

 

March 31,

 

 

 

2010

 

2010

 

ASSETS

 

 

 

 

 

Current Assets:

 

 

 

 

 

Cash and cash equivalents

 

$

20,270

 

$

47,270

 

Accounts receivable, net of allowance for doubtful accounts of $255 at September 30, 2010 and $121 at March 31, 2010

 

24,690

 

18,464

 

Inventories

 

18,496

 

19,645

 

Prepaid expenses and other current assets

 

2,725

 

1,335

 

Total current assets

 

66,181

 

86,714

 

Property, plant and equipment, net

 

6,998

 

8,247

 

Non-current portion of inventories

 

3,380

 

3,588

 

Intangible assets, net

 

4,099

 

4,643

 

Restricted cash

 

5,000

 

 

Other assets

 

530

 

254

 

Total

 

$

86,188

 

$

103,446

 

 

 

 

 

 

 

LIABILITIES AND STOCKHOLDERS’ EQUITY

 

 

 

 

 

 

 

 

 

 

 

Current Liabilities:

 

 

 

 

 

Accounts payable and accrued expenses

 

$

14,456

 

$

15,338

 

Accrued salaries and wages

 

1,438

 

1,741

 

Accrued warranty reserve

 

860

 

1,036

 

Deferred revenue

 

1,522

 

923

 

Revolving credit facility

 

7,437

 

7,571

 

Current portion of notes payable and capital lease obligations

 

124

 

161

 

Warrant liability

 

10,622

 

26,803

 

Other current liabilities

 

 

3,026

 

Total current liabilities

 

36,459

 

56,599

 

Long-term portion of notes payable and capital lease obligations

 

82

 

141

 

Other long-term liabilities

 

303

 

274

 

Commitments and contingencies (Note 14)

 

 

 

Stockholders’ Equity:

 

 

 

 

 

Preferred stock, $.001 par value; 10,000,000 shares authorized; none issued

 

 

 

Common stock, $.001 par value; 415,000,000 shares authorized; 246,434,409 shares issued and 245,537,009 shares outstanding at September 30, 2010; 243,015,511 shares issued and 242,119,402 shares outstanding at March 31, 2010

 

246

 

243

 

Additional paid-in capital

 

725,850

 

721,408

 

Accumulated deficit

 

(675,711

)

(674,178

)

Treasury stock, at cost; 897,400 shares at September 30, 2010 and 896,109 shares at March 31, 2010

 

(1,041

)

(1,041

)

Total stockholders’ equity

 

49,344

 

46,432

 

Total

 

$

86,188

 

$

103,446

 

 

See accompanying notes to condensed consolidated financial statements.

 

3



Table of Contents

 

CAPSTONE TURBINE CORPORATION AND SUBSIDIARY

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share data)
(Unaudited)

 

 

 

Three Months Ended

 

Six Months Ended

 

 

 

September 30,

 

September 30,

 

 

 

2010

 

2009

 

2010

 

2009

 

Revenue

 

$

18,922

 

$

15,522

 

$

34,974

 

$

29,247

 

Cost of goods sold

 

18,803

 

18,520

 

35,367

 

35,082

 

Gross margin (loss)

 

119

 

(2,998

)

(393

)

(5,835

)

Operating expenses:

 

 

 

 

 

 

 

 

 

Research and development

 

2,040

 

2,271

 

3,562

 

3,032

 

Selling, general and administrative

 

6,611

 

6,840

 

13,047

 

13,063

 

Total operating expenses

 

8,651

 

9,111

 

16,609

 

16,095

 

Loss from operations

 

(8,532

)

(12,109

)

(17,002

)

(21,930

)

Other income

 

 

 

4

 

 

Interest income

 

2

 

 

2

 

8

 

Interest expense

 

(196

)

(143

)

(506

)

(275

)

Change in fair value of warrant liability

 

6,937

 

(19,558

)

16,181

 

(24,755

)

Loss before income taxes

 

(1,789

)

(31,810

)

(1,321

)

(46,952

)

Provision for income taxes

 

136

 

71

 

212

 

188

 

Net loss

 

$

 (1,925

)

$

 (31,881

)

$

 (1,533

)

$

 (47,140

)

 

 

 

 

 

 

 

 

 

 

Net loss per common share — basic and diluted

 

$

 (0.01

)

$

 (0.17

)

$

(0.01

)

$

(0.25

)

 

 

 

 

 

 

 

 

 

 

Weighted average shares used to calculate basic and diluted net loss per common share

 

245,510

 

191,170

 

243,890

 

187,480

 

 

See accompanying notes to condensed consolidated financial statements.

 

4



Table of Contents

 

CAPSTONE TURBINE CORPORATION AND SUBSIDIARY

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

(Unaudited)

 

 

 

Six Months Ended

 

 

 

September 30,

 

 

 

2010

 

2009

 

Cash Flows from Operating Activities:

 

 

 

 

 

Net loss

 

$

(1,533

)

$

(47,140

)

Adjustments to reconcile net loss to net cash used in operating activities:

 

 

 

 

 

Depreciation and amortization

 

1,960

 

1,702

 

Amortization of deferred financing costs

 

97

 

40

 

Interest expense on second funding liability

 

80

 

 

Provision for allowance for doubtful accounts

 

 

168

 

Inventory (recovery) write-down

 

(52

)

617

 

Provision for warranty expenses

 

961

 

461

 

Loss on disposal of equipment

 

20

 

 

Stock-based compensation

 

1,333

 

1,867

 

Change in fair value of warrant liability

 

(16,181

)

24,755

 

Changes in operating assets and liabilities:

 

 

 

 

 

Accounts receivable

 

(6,226

)

(4,256

)

Inventories

 

1,774

 

4,142

 

Prepaid expenses and other assets

 

(1,763

)

(374

)

Accounts payable and accrued expenses

 

(818

)

2,982

 

Accrued salaries and wages and long term liabilities

 

(274

)

(623

)

Accrued warranty reserve

 

(1,137

)

(1,129

)

Deferred revenue

 

599

 

723

 

Other current liabilities

 

 

(815

)

Net cash used in operating activities

 

(21,160

)

(16,880

)

Cash Flows from Investing Activities:

 

 

 

 

 

Acquisition of and deposits on equipment and leasehold improvements

 

(616

)

(1,085

)

Increase in restricted cash

 

(5,000

)

 

Net cash used in investing activities

 

(5,616

)

(1,085

)

Cash Flows from Financing Activities:

 

 

 

 

 

Net (repayment) proceeds from revolving credit facility

 

(134

)

4,286

 

Payment of deferred financing costs

 

 

(56

)

Repayment of notes payable and capital lease obligations

 

(96

)

(10

)

Net proceeds from employee stock-based transactions

 

6

 

113

 

Net proceeds from issuance of common stock and warrants

 

 

11,611

 

Proceeds from exercise of common stock warrants

 

 

6,503

 

Net cash (used in) provided by financing activities

 

(224

)

22,447

 

Net (decrease) increase in Cash and Cash Equivalents

 

(27,000

)

4,482

 

Cash and Cash Equivalents, Beginning of Period

 

47,270

 

19,519

 

Cash and Cash Equivalents, End of Period

 

$

20,270

 

$

24,001

 

Supplemental Disclosures of Cash Flow Information:

 

 

 

 

 

Cash paid during the period for:

 

 

 

 

 

Interest

 

$

339

 

$

221

 

Income taxes

 

$

 

$

2

 

 

5



Table of Contents

 

Supplemental Disclosures of Non-Cash Information:

 

Included in accounts payable at September 30, 2010 and 2009, is $27 and $131 of fixed asset purchases, respectively.

 

During the six months ended September 30, 2010, the Company issued 3,131,313 shares of common stock to Calnetix Power Solutions, Inc. to satisfy the amount due of $3.1 million in connection with the acquisition of the Calnetix microturbine generator line. See Note 16—Acquisition, for a description of tangible and intangible assets acquired and other details of the acquisition.

 

During the six months ended September 30, 2009, the Company incurred $224 of capital expenditures that were funded by capital lease borrowings.

 

See accompanying notes to condensed consolidated financial statements.

 

6


 


Table of Contents

 

CAPSTONE TURBINE CORPORATION AND SUBSIDIARY

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

 

1.  Business and Organization

 

Capstone Turbine Corporation (the “Company”) develops, manufactures, markets and services microturbine technology solutions for use in stationary distributed power generation applications, including cogeneration (combined heat and power (“CHP”), integrated combined heat and power (“ICHP”), and combined cooling, heat and power (“CCHP”)), resource recovery and secure power. In addition, the Company’s microturbines can be used as battery charging generators for hybrid electric vehicle applications. The Company was organized in 1988 and has been commercially producing its microturbine generators since 1998.

 

The Company has incurred significant operating losses since its inception. Management anticipates incurring additional losses until the Company can produce sufficient revenue to cover its operating costs. To date, the Company has funded its activities primarily through private and public equity offerings.

 

2.  Basis of Presentation

 

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles” or “GAAP”) for interim financial information and pursuant to the instructions to Form 10-Q and Regulation S-X promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). They do not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements. The condensed consolidated balance sheet at March 31, 2010 was derived from audited financial statements included in the Company’s Annual Report on Form 10-K for the year ended March 31, 2010. In the opinion of management, the interim condensed consolidated financial statements include all adjustments (consisting of normal recurring adjustments) necessary for a fair presentation of the financial condition, results of operations and cash flows for such periods. Results of operations for any interim period are not necessarily indicative of results for any other interim period or for the full year. These condensed consolidated financial statements should be read in conjunction with the consolidated financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended March 31, 2010. This Quarterly Report on Form 10-Q (the “Form 10-Q”) refers to the Company’s fiscal years ending March 31 as its “Fiscal” year.

 

The condensed consolidated financial statements have been prepared assuming the Company will continue as a going concern, which contemplates the realization of assets and satisfaction of liabilities in the normal course of business. At September 30, 2010, the Company had $83.5 million, or 667 units, in backlog, all of which was current and expected to be shipped within the next twelve months. However, the timing of shipments is subject to change based on several variables (including customer payments and customer delivery schedules), some of which are beyond the Company’s control and can affect the Company’s quarterly revenue and backlog. Although the Company has made progress on direct material cost reduction efforts, the Company was behind schedule in reducing costs at the end of the second quarter of Fiscal 2011. In addition, the Company’s working capital requirements are higher than planned primarily because of slower collection of accounts receivable and lower than anticipated inventory turns. Further, the Company has not been able to fully achieve its planned number of product shipments partly as a result of a shortage in certain key supplies. If the Company is unable to improve its performance in the areas discussed above and successfully obtain a release of all or a portion of its restricted cash from Wells Fargo as further described under “Liquidity and Capital Resources” in this Form 10-Q, the Company may need to raise additional funds in the near term. The Company could seek to raise such funds by selling additional securities to the public or to selected investors, or by obtaining debt financing. There is no assurance that the Company will be able to obtain additional funds on commercially favorable terms, or at all. If the Company raises additional funds by issuing additional equity or convertible debt securities, the fully diluted ownership percentages of existing stockholders would be reduced. In addition, any equity or debt securities that it would issue may have rights, preferences or privileges senior to those of the holders of its common stock. Should the Company be unable to execute its plans or obtain additional financing, that might be needed if the Company’s cash needs change, the Company may be unable to continue as a going concern. The unaudited condensed consolidated financial statements do not include any adjustments that might result from the outcome of these uncertainties.

 

The condensed consolidated financial statements include the accounts of the Company and Capstone Turbine International, Inc., its wholly owned subsidiary that was formed in June 2004, after elimination of inter-company transactions.

 

The Company has conducted a subsequent events review through the date the financial statements were issued, and has concluded that there were no subsequent events requiring adjustments or additional disclosures to the Company’s financial statements at September 30, 2010.

 

7



Table of Contents

 

3.  Recently Issued Accounting Standards

 

In April 2010, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2010-17, Revenue Recognition — Milestone Method (“ASU 2010-17”). ASU 2010-17 provides guidance on the criteria that should be met for determining whether the milestone method of revenue recognition is appropriate. A vendor can recognize consideration that is contingent upon achievement of a milestone in its entirety as revenue in the period in which the milestone is achieved only if the milestone meets all criteria to be considered substantive. The following criteria must be met for a milestone to be considered substantive. The consideration earned by achieving the milestone should be: (1) commensurate with either the level of effort required to achieve the milestone or the enhancement of the value of the item delivered as a result of a specific outcome resulting from the vendor’s performance to achieve the milestone; (2) related solely to past performance and (3) reasonable relative to all deliverables and payment terms in the arrangement. No split of an individual milestone is allowed and there can be more than one milestone in an arrangement.  Accordingly, an arrangement may contain both substantive and non-substantive milestones. ASU 2010-17 is effective on a prospective basis for milestones achieved in fiscal years, and interim periods within those years, beginning on or after June 15, 2010. The Company adopted this updated guidance with no impact on its consolidated financial position or results of operations.

 

In September 2009, the FASB issued updated guidance of Accounting Standards Codification (“ASC”) 605, “Revenue Recognition,” for establishing the criteria for separating consideration in multiple element arrangements. The updated guidance is effective for fiscal years beginning on or after June 15, 2010 and requires companies allocating the overall consideration to each deliverable to use an estimated selling price of individual deliverables in the arrangement in the absence of vendor specific evidence or other third party evidence of the selling price for the deliverables. The updated guidance also provides additional factors that should be considered when determining whether software in a tangible product is essential to its functionality. The Company adopted this updated guidance with no impact on its consolidated financial position or results of operations.

 

4.  Customer Concentrations and Accounts Receivable

 

Sales to Aquatec-Maxcon Pty Ltd. (“Aquatec”), the Company’s Australian distributor, Pumps and Service Company (“Pumps and Service”), one of the Company’s domestic distributors, and Banking Production Centre (“BPC”), one of the Company’s Russian distributors, accounted for 14%, 13% and 11% of revenue for the three months ended September 30, 2010, respectively. Sales to BPC, Aquatec, and Fluxo Soluçôes Intergradas Ltda, the Company’s Brazilian distributor, accounted for 20%, 14% and 12% of revenue for the three months ended September 30, 2009, respectively.

 

BPC and Pumps and Service accounted for 21% and 10% of revenue, respectively, for the six months ended September 30, 2010. For the six months ended September 30, 2009, BPC and Aquatec accounted for 23% and 16% of revenue, respectively.

 

Additionally, BPC and Greenvironment plc, the Company’s Finland distributor, accounted for 19% and 12% of net accounts receivable, respectively, as of September 30, 2010. BPC and Greenvironment plc accounted for 20% and 16% of net accounts receivable, respectively, as of March 31, 2010.

 

5.  Inventories

 

Inventories are stated at the lower of standard cost (which approximates actual cost on the first-in, first-out method) or market and consisted of the following:

 

 

 

September 30,
2010

 

March 31,
2010

 

 

 

(In thousands)

 

Raw materials

 

$

20,329

 

$

19,772

 

Work in process

 

469

 

583

 

Finished goods

 

1,078

 

2,878

 

Total

 

21,876

 

23,233

 

Less non-current portion

 

3,380

 

3,588

 

Current portion

 

$

18,496

 

$

19,645

 

 

The non-current portion of inventories represents that portion of the inventories in excess of amounts expected to be sold or used in the next twelve months.

 

8



Table of Contents

 

6.  Property, Plant and Equipment

 

Property, plant and equipment consisted of the following:

 

 

 

September 30,
2010

 

March 31,
2010

 

 

 

(In thousands)

 

Machinery, rental equipment, equipment, automobiles and furniture

 

$

22,257

 

$

22,543

 

Leasehold improvements

 

9,652

 

9,654

 

Molds and tooling

 

4,965

 

4,930

 

 

 

36,874

 

37,127

 

Less accumulated depreciation and amortization

 

(29,876

)

(28,880

)

Total property, plant and equipment, net

 

$

6,998

 

$

8,247

 

 

During the three months ended September 30, 2010, the Company sold ten of its microturbine rental units for approximately $430,000. The net book value of the rental equipment related to this sale was approximately $365,000.  The Company recognized this sale as revenue and the cost of the units as cost of goods sold.

 

7.  Intangible Assets

 

Intangible assets consisted of the following (in thousands):

 

 

 

 

 

At

 

 

 

Weighted

 

September 30, 2010

 

March 31, 2010

 

 

 

Average

 

Gross

 

 

 

 

 

Gross

 

 

 

 

 

 

 

Amortization

 

carrying

 

Accumulated

 

 

 

carrying

 

Accumulated

 

 

 

 

 

period

 

amount

 

amortization

 

Net

 

amount

 

amortization

 

Net

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manufacturing license

 

17 years

 

$

3,700

 

$

(3,363

)

$

337

 

$

3,700

 

$

(3,338

)

$

362

 

Technology

 

10 years

 

2,240

 

(149

)

2,091

 

2,240

 

(37

)

2,203

 

Parts and service customer relationships

 

5 years

 

1,080

 

(123

)

957

 

1,080

 

(26

)

1,054

 

TA100 customer relationships

 

2 years

 

617

 

(206

)

411

 

617

 

(51

)

566

 

Backlog

 

1.2 years

 

490

 

(216

)

274

 

490

 

(91

)

399

 

Trade name

 

1.2 years

 

69

 

(40

)

29

 

69

 

(10

)

59

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total

 

 

 

$

8,196

 

$

(4,097

)

$

4,099

 

$

8,196

 

$

(3,553

)

$

4,643

 

 

The Company recorded amortization expense of $0.2 million and $0.5 million for the three and six months ended September 30, 2010, respectively. The Company recorded amortization expense of $12,300 and $24,600 for the three and six months ended September 30, 2009, respectively.

 

The manufacturing license provides the Company with the ability to manufacture recuperator cores previously purchased from the supplier. The Company is required to pay a per-unit royalty fee over a seventeen-year period for cores manufactured and sold by the Company using the technology. Royalties of approximately $18,200 and $14,800 were earned by the supplier for the three months ended September 30, 2010 and 2009, respectively. Royalties of approximately $28,400 and $26,200 were earned by the supplier for the six months ended September 30, 2010 and 2009, respectively. Earned royalties of approximately $18,200 and $44,600 were unpaid as of September 30, 2010 and March 31, 2010, respectively, and are included in accrued expenses in the accompanying balance sheets.

 

On February 1, 2010, the Company acquired the 100 kW (“TA100”) microturbine product line from Calnetix Power Solutions, Inc. (“CPS”) to expand the Company’s microturbine product line and to gain relationships with distributors to supply the Company’s products. See Note 16—Acquisition, for discussion of the TA100 acquired from CPS. The acquired intangible assets include technology, parts and service customer relationships, TA100 customer relationships, backlog and trade name. These intangible assets have estimated useful lives between one and ten years. The fair value assigned to identifiable intangible assets acquired has been determined primarily by using the income approach. Purchased identifiable intangible assets, except for backlog, are amortized on a straight-line basis over their respective useful lives and classified as a component of cost of goods sold or selling, general and administrative expenses based on the function of the underlying asset. Backlog is amortized on a per unit basis as the backlog units are sold and presented as a component of cost of goods sold.

 

9



Table of Contents

 

8.  Stock-Based Compensation

 

As of September 30, 2010, the Company had outstanding 3,700,000 non-qualified common stock options issued outside of the Amended and Restated 2000 Equity Incentive Plan (the “2000 Plan”). These stock options were granted prior to Fiscal 2008 with exercise prices equal to the fair market value of the Company’s common stock on the grant date as inducement grants to new officers and employees of the Company. Included in the 3,700,000 options were 2,000,000 options granted to the Company’s President and Chief Executive Officer, 850,000 options granted to the Company’s Executive Vice President of Sales and Marketing, 650,000 options granted to the Company’s Senior Vice President of Customer Service and 200,000 options granted to the Company’s Senior Vice President of Human Resources. Additionally, the Company had outstanding 212,500 restricted stock units issued outside of the 2000 Plan. These restricted stock units were issued prior to Fiscal 2008 as inducement grants to new officers of the Company. Included in the 212,500 units were 125,000 units granted to the Company’s President and Chief Executive Officer, 50,000 units granted to the Company’s Executive Vice President of Sales and Marketing and 37,500 granted to the Company’s Senior Vice President of Customer Service. Although the options and restricted stock units were not granted under the 2000 Plan, they are governed by terms and conditions identical to those under the 2000 Plan. All options are subject to the following vesting provisions: one-fourth vests one year after the issuance date and 1/48th vests on the first day of each full month thereafter, so that all shall be vested on the first day of the 48th month after the issuance date. All outstanding options have a contractual term of ten years. The restricted stock units vest in equal installments over a period of two or four years. For restricted stock units with two year vesting, one-half of the units vests one year after the issuance date and the other half vests two years after the issuance date. For restricted stock units with four year vesting, one-fourth vests annually beginning one year after the issuance date.

 

Valuation and Expense Information

 

For the three months ended September 30, 2010 and 2009, the Company recognized stock-based compensation expense of $0.7 million and $0.9 million, respectively. For the six months ended September 30, 2010 and 2009, the Company recognized stock-based compensation expense of $1.3 million and $1.9 million, respectively. The following table summarizes, by statement of operations line item, stock-based compensation expense (in thousands):

 

 

 

Three Months Ended

 

Six Months Ended

 

 

 

September 30,

 

September 30,

 

 

 

2010

 

2009

 

2010

 

2009

 

Cost of goods sold

 

$

68

 

$

62

 

$

169

 

$

211

 

Research and development

 

32

 

158

 

63

 

316

 

Selling, general and administrative

 

571

 

677

 

1,101

 

1,340

 

Stock-based compensation expense

 

$

671

 

$

897

 

$

1,333

 

$

1,867

 

 

The Company calculated the estimated fair value of each stock option on the date of grant using the Black-Scholes option-pricing model and the following weighted-average assumptions:

 

 

 

Three Months Ended
September 30,

 

Six Months Ended
September 30,

 

 

 

2010

 

2009

 

2010

 

2009

 

Risk-free interest rates

 

1.4

%

3.5

%

3.1

%

2.9

%

Expected lives (in years)

 

5.0

 

4.9

 

5.0

 

4.9

 

Dividend yield

 

%

%

%

%

Expected volatility

 

97.3

%

91.8

%

97.9

%

87.2

%

 

The Company’s computation of expected volatility for the three and six months ended September 30, 2010 and 2009 was based on historical volatility. The expected life, or term, of options granted is derived from historical exercise behavior and represents the period of time that stock option awards are expected to be outstanding. Management has selected a risk-free rate based on the implied yield available on U.S. Treasury Securities with a maturity equivalent to the options’ expected term. Included in the calculation of stock-based compensation expense is the Company’s estimated forfeiture rate. Stock-based compensation expense is based on awards that are ultimately expected to vest and accordingly, equity-based compensation recognized in the three and six months ended September 30, 2010 and 2009 has been reduced by estimated forfeitures. Management’s estimate of forfeitures is based on historical forfeitures.

 

10



Table of Contents

 

Information relating to all outstanding stock options, except for rights associated with the 2000 Employee Stock Purchase Plan, is as follows:

 

 

 

Shares

 

Weighted
Average
Exercise Price

 

Weighted-
Average
Remaining
Contractual
Term
 (in years)

 

Aggregate
Intrinsic Value

 

Options outstanding at March 31, 2010

 

9,183,577

 

$

1.61

 

 

 

 

 

Granted

 

1,086,600

 

1.02

 

 

 

 

 

Exercised

 

(5,000

)

0.99

 

 

 

 

 

Forfeited, cancelled or expired

 

(72,478

)

6.92

 

 

 

 

 

Options outstanding at September 30, 2010

 

10,192,699

 

$

1.51

 

6.9

 

$

9,800

 

 

 

 

 

 

 

 

 

 

 

Options fully vested at September 30, 2010 and those expected to vest beyond September 30, 2010

 

9,762,920

 

$

1.53

 

6.8

 

$

8,990

 

 

 

 

 

 

 

 

 

 

 

Options exercisable at September 30, 2010

 

7,338,054

 

$

1.70

 

6.3

 

$

1,000

 

 

The weighted average per share grant date fair value of options granted during the three months ended September 30, 2010 and 2009 was $0.66 and $1.19, respectively. The weighted average per share grant date fair value of options granted during the six months ended September 30, 2010 and 2009 was $1.02 and $0.84, respectively. There were no options exercised during the three months ended September 30, 2010. The total intrinsic value of options exercised during the three months ended September 30, 2009 was approximately $0.1 million. The total intrinsic value of options exercised during the six months ended September 30, 2010 and 2009 was approximately $1,150 and $0.1 million, respectively. As of September 30, 2010, there was approximately $1.7 million of total compensation cost related to unvested stock option awards that is expected to be recognized as expense over a weighted average period of 2.4 years.

 

During the six months ended September 30, 2010 and 2009, the Company issued a total of 61,091 and 17,660 shares of stock, respectively, to non-employee directors who elected to take payment of all or any part of the directors’ fees in stock in lieu of cash. The shares of stock were valued based on the closing price of the Company’s common stock on the date of grant and the weighted average grant date fair value for the shares issued during the six months ended September 30, 2010 and 2009 was $0.90 and $0.89, respectively.

 

A summary of restricted stock unit activity for the six months ended September 30, 2010 is as follows:

 

 

 

Shares

 

Weighted
Average
Grant-Date Fair
Value

 

Unvested restricted stock units outstanding at March 31, 2010

 

1,734,504

 

$

0.91

 

 

 

 

 

 

 

Granted

 

590,930

 

1.05

 

Vested and issued

 

(211,753

)

1.11

 

Forfeited

 

(54,174

)

1.43

 

 

 

 

 

 

 

Unvested restricted stock units outstanding at September 30, 2010

 

2,059,507

 

$

1.22

 

Restricted stock units expected to vest beyond September 30, 2010

 

1,791,115

 

$

0.77

 

 

The restricted stock units were valued based on the closing price of the Company’s common stock on the date of issuance, and compensation cost is recorded on a straight-line basis over the vesting period. The related compensation expense recognized has been reduced by estimated forfeitures. The Company’s estimate of forfeitures is based on historical forfeitures.

 

The total fair value of restricted stock units vested and issued by the Company during the three months ended September 30, 2010 and 2009 was approximately $36,000 and $25,000, respectively. The total fair value of restricted stock units vested and issued by the Company during the six months ended September 30, 2010 and 2009 was approximately $0.3 million and $0.2 million, respectively. The Company recorded expense of approximately $0.3 million and $0.2 million associated with its restricted stock awards and units during the three months ended September 30, 2010 and 2009, respectively. The Company recorded expense of approximately $0.5 million and $0.4 million associated with its restricted stock awards and units during the six months ended September 30, 2010 and 2009, respectively. As of September 30, 2010, there was approximately $1.2 million of total compensation cost related to nonvested restricted stock units that is expected to be recognized as expense over a weighted average period of 2.16 years.

 

11



Table of Contents

 

9.  Underwritten and Registered Direct Placement of Common Stock

 

Effective February 24, 2010, the Company completed an underwritten public offering in which it sold 43.8 million shares of the Company’s common stock, par value $.001 per share, at a price of $1.05 per share. The sale resulted in gross proceeds of approximately $46.0 million and proceeds, net of direct transaction costs, of approximately $42.5 million.

 

Effective September 17, 2009, the Company entered into warrant exercise agreements with the holders (the “Holders”) of warrants to purchase an aggregate of 7.2 million shares of the Company’s common stock, par value $0.001 per share, issued by the Company to such Holders on May 7, 2009 (the “Initial Warrants”). These warrants are classified as liabilities under the caption “Warrant liability” and recorded at estimated fair value with the corresponding charge under the caption “Change in fair value of warrant liability.” See Note 10—Fair Value Measurements for disclosure regarding the fair value of financial instruments. Pursuant to the warrant exercise agreements, the Company agreed to issue and sell to the Holders new warrants to purchase an aggregate of 5.8 million shares of common stock (the “New Warrants”) in exchange for the exercise in full of the Initial Warrants at the reduced exercise price of $0.90 per share. The modification of these warrants resulted in a charge of $3.8 million to operations during the three months ended September 30, 2009. The offering price of the New Warrants acquired by the Holders was $0.0625 per share of common stock, and the exercise price of the New Warrants was $1.42 per share. The New Warrants are exercisable through May 7, 2016 and include certain weighted average anti-dilution provisions, subject to certain limitations. The sale resulted in gross proceeds of approximately $0.4 million and the Company recorded a $6.4 million warrant liability, which represented the fair value of the New Warrants on the date of issuance. The exercise of the Initial Warrants resulted in gross proceeds of approximately $6.5 million. The February 2010 transaction triggered certain anti-dilution provisions in the warrants outstanding prior to the offering. As a result, the exercise price of each warrant previously outstanding was adjusted. Following such adjustments, warrants issued in September 2009 and still outstanding as of September 30, 2010 represented warrants to purchase 5.8 million shares at an exercise price of $1.34 per share.

 

Effective May 7, 2009, the Company completed a registered direct placement in which it sold 14.4 million shares of the Company’s common stock, par value $.001 per share, and warrants to purchase 10.8 million shares of common stock with an initial exercise price of $0.95 per share, at a unit price of $0.865 per unit. Each unit consisted of one share of common stock and a warrant to purchase 0.75 shares of common stock. These warrants are classified as liabilities under the caption “Warrant liability” in the accompanying balance sheets and recorded at estimated fair value with the corresponding charge under the caption “Change in fair value of warrant liability” in the accompanying statements of operations. See Note 10—Fair Value Measurements for disclosure regarding the fair value of financial instruments. The seven-year warrants were immediately exercisable and include certain weighted average anti-dilution provisions, subject to certain limitations. The sale resulted in gross proceeds of approximately $12.5 million and proceeds, net of direct transaction costs, of approximately $11.2 million. Warrants to purchase 3.6 million shares at an exercise price of $0.95 per share issued in May 2009 were outstanding as of September 30, 2010.

 

Effective September 23, 2008, the Company completed a registered direct placement in which it sold 21.5 million shares of the Company’s common stock, par value $.001 per share, and warrants to purchase 6.4 million shares of common stock with an initial exercise price of $1.92 per share, at a price of $14.90 per unit. Each unit consisted of ten shares of common stock and warrants to purchase three shares of common stock. These warrants are classified as liabilities under the caption “Warrant liability” in the accompanying balance sheets and recorded at estimated fair value with the corresponding charge under the caption “Change in fair value of warrant liability” in the accompanying statement of operations. See Note 10—Fair Value Measurements for disclosure regarding the fair value of financial instruments. The five-year warrants are immediately exercisable and include anti-dilution provisions, subject to certain limitations. Additionally, the Company has the right, at its option, to accelerate the expiration of the exercise period of the outstanding warrants issued in the offering, in whole or from time to time in part, at any time after the second anniversary of the original issue date of the warrants, subject to certain limitations. The sale resulted in gross proceeds of approximately $32.0 million and proceeds, net of direct incremental costs, of the offering of approximately $29.5 million. The February 2010, September 2009 and May 2009 transactions triggered certain anti-dilution provisions in the warrants outstanding prior to each of the offerings. The issuance of stock to CPS on the Second Funding Date (as hereinafter defined) also triggered certain anti-dilution provisions in the warrants outstanding. See Note 16—Acquisition, for discussion of the CPS transaction. As a result, the number of shares to be received upon exercise and the exercise price of each warrant previously outstanding were adjusted. Following such adjustments, warrants issued in September 2008 and still outstanding as of September 30, 2010 represented warrants to purchase 7.7 million shares at an exercise price of $1.60 per share. As of September 30, 2010, none of these warrants had been exercised.

 

12



Table of Contents

 

Effective January 24, 2007, the Company completed a registered direct placement in which it sold 40 million shares of the Company’s common stock, par value $.001 per share, and warrants to purchase 20 million shares of common stock with an initial exercise price of $1.30 per share, at a price of $1.14 per unit. Each unit consisted of one share of common stock and warrants to purchase 0.5 shares of common stock. These warrants are classified as liabilities under the caption “Warrant liability” in the accompanying balance sheets and recorded at estimated fair value with the corresponding charge under the caption “Change in fair value of warrant liability” in the accompanying statements of operations. See Note 10—Fair Value Measurements for disclosure regarding the fair value of financial instruments. The five-year warrants are immediately exercisable and include anti-dilution provisions, subject to certain limitations. During Fiscal 2009, warrants to purchase 3.2 million shares were exercised resulting in proceeds of approximately $4.1 million. The February 2010 and May 2009 transactions triggered certain anti-dilution provisions in the warrants outstanding prior to the offering. As a result, the number of shares to be received upon exercise and the exercise price of each warrant previously outstanding were adjusted. Following such adjustments, the warrants issued in January 2007 and still outstanding as of September 30, 2010 represented warrants to purchase 17.0 million shares at an exercise price of $1.17 per share.

 

10. Fair Value Measurements

 

The FASB has established a framework for measuring fair value in generally accepted accounting principles. That framework provides a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. The hierarchy gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (level 1 measurements) and the lowest priority to unobservable inputs (level 3 measurements). The three levels of the fair value hierarchy are described as follows:

 

Level 1.  Inputs to the valuation methodology are unadjusted quoted prices for identical assets or liabilities in active markets.

 

Level 2.  Inputs to the valuation methodology include:

 

·                  Quoted prices for similar assets or liabilities in active markets

 

·                  Quoted prices for identical or similar assets or liabilities in inactive markets

 

·                  Inputs other than quoted prices that are observable for the asset or liability

 

·                  Inputs that are derived principally from or corroborated by observable market data by correlation or other means

 

If the asset or liability has a specified (contractual) term, the level 2 input must be observable for substantially the full term of the asset or liability.

 

Level 3.  Inputs to the valuation methodology are unobservable and significant to the fair value measurement.

 

The asset or liability’s fair value measurement level within the fair value hierarchy is based on the lowest level of any input that is significant to the fair value measurement. Valuation techniques used need to maximize the use of observable inputs and minimize the use of unobservable inputs.

 

Effective April 1, 2009, the Company adopted the amended provisions of ASC 815 on determining what types of instruments or embedded features in an instrument held by a reporting entity can be considered indexed to its own stock for the purpose of evaluating the first criteria of the scope exception in ASC 815. Warrants issued by the Company in prior periods with certain anti-dilution provisions for the holder are no longer considered indexed to the Company’s own stock, and therefore no longer qualify for the scope exception and must be accounted for as derivatives. These warrants were reclassified as liabilities under the caption “Warrant liability” and recorded at estimated fair value at each reporting date, computed using the Black-Scholes valuation method. Changes in the liability from period to period are recorded in the Statements of Operations under the caption “Change in fair value of warrant liability.”

 

The Company recorded a total benefit of $6.9 million and a charge of $19.6 million for the change in the fair value of the warrant liability during the three months ended September 30, 2010 and 2009, respectively. The Company recorded a total benefit of $16.2 million and a charge of $24.8 million for the change in the fair value of the warrant liability during the six months ended September 30, 2010 and 2009, respectively.

 

The fair value of the Company’s warrant liability (see Note 9—Underwritten and Registered Direct Placement of Common Stock) recorded in the Company’s financial statements is determined using the Black-Scholes valuation method and the quoted price of the Company’s common stock in an active market, a level 2 input. Volatility is based on the actual market activity of the Company’s stock. The expected life is based on the remaining contractual term of the warrants and the risk free interest rate is based on the implied yield available on U.S. Treasury Securities with a maturity equivalent to the warrants’ expected life.

 

13



Table of Contents

 

The Company calculated the estimated fair value of warrants on the date of issuance and at each subsequent reporting date using the Black-Scholes model and the following assumptions:

 

 

 

Three Months Ended
September 30, 2010

 

Three Months Ended
September 30, 2009

 

 

 

 

 

 

 

Risk-free interest rates range

 

0.61% to 2.54%

 

1.6% to 2.42%

 

Contractual term (in years)

 

1.3 years to 5.9 years

 

2.6 years to 6.8 years

 

Expected volatility range

 

85.3% to 103%

 

88.1% to 98.9%

 

 

From time to time, the Company sells common stock warrants that are derivative instruments. The Company does not enter into speculative derivative agreements and does not enter into derivative agreements for the purpose of hedging risks.

 

The table below presents the Company’s assets and liabilities that are measured at fair value on a recurring basis at September 30, 2010 and are categorized using the fair value hierarchy. The fair value hierarchy has three levels based on the reliability of the inputs used to determine the fair value (in thousands):

 

 

 

Fair Value Measurements at September 30, 2010

 

 

 

Total

 

Quoted Prices in
Active Markets for
Identical Assets
(Level 1)

 

Quoted Prices in
Active Markets for
Identical Assets
(Level 2)

 

Significant
Unobservable
Inputs
(Level 3)

 

Cash equivalents

 

$

12,239

 

$

12,239

 

$

 

$

 

Restricted cash

 

$

5,000

 

$

5,000

 

$

 

$

 

Warrant liability

 

$

(10,622

)

$

 

$

(10,622

)

$

 

 

Cash equivalents includes cash held in money market and U.S. treasury funds at September 30, 2010.

 

11. Revolving Credit Facility

 

The Company maintains two Credit and Security Agreements (the “Agreements”) with Wells Fargo Bank, National Association (“Wells Fargo”). The Agreements provide the Company with a line of credit of up to $10 million in the aggregate (the “Credit Facility”). The amount actually available to the Company may be less and may vary from time to time depending on, among other factors, the amount of its eligible inventory and accounts receivable. As security for the payment and performance of the Credit Facility, the Company granted a security interest in favor of Wells Fargo in substantially all of the assets of the Company. As of September 30, 2010, the Company had a standby letter of credit for one of its vendors in the amount of $0.5 million. This letter of credit limits the amount the Company can borrow on its Credit Facility with Wells Fargo. The Agreements will terminate in accordance with their terms on February 9, 2012 unless terminated sooner.

 

The Agreements include affirmative covenants as well as negative covenants that prohibit a variety of actions without Wells Fargo’s consent, including covenants that limit the Company’s ability to (a) incur or guarantee debt, (b) create liens, (c) enter into any merger, recapitalization or similar transaction or purchase all or substantially all of the assets or stock of another entity, (d) pay dividends on, or purchase, acquire, redeem or retire shares of, the Company’s capital stock, (e) sell, assign, transfer or otherwise dispose of all or substantially all of the Company’s assets, (f) change the Company’s accounting method or (g) enter into a different line of business. Furthermore, the Agreements contain financial covenants, including (a) a requirement to maintain a specified minimum book worth, (b) a requirement not to exceed specified levels of losses, (c) a requirement to maintain a specified ratio of minimum cash balances to unreimbursed line of credit advances, and (d) limitations on the Company’s capital expenditures.

 

As of March 31, 2010, the Company determined that it was not in compliance with the financial covenant in the Agreements regarding the Company’s net income. On May 11, 2010, the Company received a notice of default from Wells Fargo related to the Company’s noncompliance. As a result, Wells Fargo imposed default pricing of an additional 3.0% effective March 1, 2010. On June 11, 2010, the Company received from Wells Fargo a waiver of the Company’s noncompliance with the financial covenant as of March 31, 2010 and the Company amended the Agreements to set the covenants for Fiscal 2011. As a condition of the amended Agreements, the Company had restricted $5.0 million of cash effective June 11, 2010 as additional security for the Credit Facility. The Company is in discussions with Wells Fargo pertaining to the release of all or a portion of the restricted cash.  If the Company had not obtained the waiver and amended the Agreements, the Company would not be able to draw additional funds under the Credit Facility. In addition, the Company has pledged its accounts receivables, inventories, equipment, patents and other assets as collateral for its Agreements, which would be subject to seizure by Wells Fargo if the Company was in default under the Agreements and unable to repay the indebtedness. Wells Fargo also has the option to terminate the Agreements or accelerate the indebtedness during a period of noncompliance. As of September 30, 2010, the Company was in compliance with the covenants contained in the amended Agreements and based on the Company’s current forecasts, management believes that the Company will be in compliance with the covenants through the end of Fiscal 2011.

 

14



Table of Contents

 

On June 29, 2010, the Company entered into a Fourth Amendment to the Agreements (the “Fourth Amendment”) with Wells Fargo. The Fourth Amendment amended the financial covenant related to capital expenditures by adding a limitation on expenditures for Fiscal 2011.  Under the terms of the Fourth Amendment, the Company may not incur or contract to incur capital expenditures of more than (i) $4.5 million in the aggregate during Fiscal 2011, and (ii) zero for each subsequent year until the Company and Wells Fargo agree on limits on capital expenditures for subsequent periods based on the Company’s projections for such periods.

 

The Company is required to maintain a Wells Fargo collection account for cash receipts on all of its accounts receivable. These amounts are immediately applied to reduce the outstanding amount on the Credit Facility. The floating interest rate for line of credit advances is the greater of the Prime Rate plus applicable margin or 5% plus applicable margin, subject to a minimum interest floor. Based on the revolving nature of the Company’s borrowings and payments, the Company classifies all outstanding amounts as current liabilities. The applicable margin varies based on net income and the minimum interest floor is set at $31,000 per month. The Company’s borrowing rate at September 30, 2010 and March 31, 2010 was 7.5% and 10.5%, respectively.

 

The Company has incurred $0.2 million in origination fees. These fees have been capitalized and are being amortized to interest expense through February 2012. The Company is also required to pay an annual unused line fee of one-quarter of one percent of the daily average of the maximum line amount and 1.5% interest with respect to each letter of credit issued by Wells Fargo. These amounts, if any, are also recorded as interest expense by the Company. As of September 30, 2010 and March 31, 2010, $7.4 million and $7.6 million in borrowings were outstanding, respectively, under the Credit Facility. Interest expense related to the Credit Facility during the three months ended September 30, 2010 and 2009 was $0.2 million and $0.1 million, which includes $48,000 and $21,000 in amortization of deferred financing costs, respectively. Interest expense related to the Credit Facility during the six months ended September 30, 2010 and 2009 was $0.4 million and $0.2 million, which includes $0.1 million and $40,000 in amortization of deferred financing costs, respectively.

 

12.  Accrued Warranty Reserve

 

The Company provides for the estimated costs of warranties at the time revenue is recognized. The specific terms and conditions of those warranties vary depending upon the product sold, the location of the sale and the length of extended warranties sold. The Company’s product warranties generally start from the delivery date and continue for up to eighteen months. Factors that affect the Company’s warranty obligation include product failure rates, anticipated hours of product operations and costs of repair or replacement in correcting product failures. These factors are estimates that may change based on new information that becomes available each period. Similarly, the Company also accrues the estimated costs to address reliability repairs on products no longer in warranty when, in the Company’s judgment, and in accordance with a specific plan developed by the Company, it is prudent to provide such repairs. The Company assesses the adequacy of recorded warranty liabilities quarterly and makes adjustments to the liability as necessary. When the Company has sufficient evidence that product changes are altering the historical failure occurrence rates, the impact of such changes is then taken into account in estimating future warranty liabilities.

 

Changes in accrued warranty reserve during the six months ended September 30, 2010 are as follows (in thousands):

 

Balance, March 31, 2010

 

$

1,036

 

Warranty provision relating to products shipped during the period

 

437

 

Changes for accruals related to preexisting warranties or reliability repair programs

 

524

 

Deductions for warranty claims

 

(1,137

)

Balance, September 30, 2010

 

$

860

 

 

13.  Other Current Liabilities

 

In September 2007, the Company entered into a Development and License Agreement (the “Development Agreement”) with UTC Power Corporation (“UTCP”), a division of United Technologies Corporation. The Development Agreement engages UTCP to fund and support the Company’s continued development and commercialization of the Company’s 200 kilowatt (“C200”) microturbine. Pursuant to the terms of the Development Agreement, UTCP contributed $12.0 million in cash and approximately $800,000 of in-kind services toward the Company’s efforts to develop the C200. In return, the Company pays to UTCP an ongoing royalty of 10% of the sales price of the C200 sold to customers other than UTCP until the aggregate of UTCP’s cash and in-kind services investment has been recovered and, thereafter, the royalty will be reduced to 5% of the sales price. UTCP earned $0.2 million and $73,000 in royalties for C200 system sales during the three months ended September 30, 2010 and 2009, respectively. UTCP earned $0.3 million and $0.1 million in royalties for C200 system sales during the six months ended September 30, 2010 and 2009, respectively. Earned royalties of $0.2 million were unpaid as of September 30, 2010 and March 31, 2010, respectively and are included in accrued expenses in the accompanying balance

 

15



Table of Contents

 

sheet. The Company recorded the benefits from this Development Agreement as a reduction of research and development (“R&D”) expenses. During the three months ended June 30, 2009, the Company recognized approximately $1.3 million of such benefits. As of June 30, 2009, the Company had received a total of $0.5 million of in-kind services. In-kind services performed by UTCP under the cost-sharing program are recorded as consulting expense within R&D expenses. Funding in excess of expenses incurred is recorded in Other Current Liabilities. The program concluded in June 2009 and, therefore, there was no funding in excess of expenses recorded in Other Current Liabilities as of September 30, 2010 and March 31, 2010. The reduction of R&D expenses was recognized on a percentage of completion basis, limited by the amount of funding received and/or earned based on milestone deliverables.

 

14.  Commitments and Contingencies

 

Lease Commitments

 

The Company leases offices and manufacturing facilities under various non-cancelable operating leases expiring at various times through the fiscal year ending March 31, 2016. All of the leases require the Company to pay maintenance, insurance and property taxes. The lease agreements for primary office and manufacturing facilities provide for rent escalation over the lease term and renewal options for five-year periods. Rent expense is recognized on a straight-line basis over the term of the lease. The difference between rent expense recorded and the amount paid is credited or charged to deferred rent which is included in other long-term liabilities in the accompanying balance sheets. The balance of deferred rent was approximately $0.3 million as of September 30, 2010 and March 31, 2010. Rent expense was approximately $0.7 million and $0.6 million during the three months ended September 30, 2010 and 2009, respectively. Rent expense was approximately $1.3 million and $1.1 million during the six months ended September 30, 2010 and 2009, respectively.

 

Purchase Commitments

 

As of September 30, 2010, the Company had firm commitments to purchase inventories of approximately $20.1 million. Certain inventory delivery dates and related payments are not firmly scheduled; therefore amounts under these firm purchase commitments will be payable upon the receipt of the related inventories.

 

Other Commitments

 

CPS will continue to manufacture the TA100 microturbines for Capstone through March 31, 2011. The Company has agreed to purchase for cash any TA100 microturbine inventory remaining after March 31, 2011 that has not been consumed as part of the TA100 manufacturing process and is not considered excess or obsolete and will obtain title to certain TA100 manufacturing equipment.

 

In September 2010, the Company was awarded a grant from the U.S. Department of Energy (“DOE”) for the research, development and testing of a more efficient microturbine Combined Heat and Power (CHP) system. Part of the improved efficiency will come from an improved  microturbine design, with a projected electrical efficiency of 42% and power output of 370kW. The project is estimated to last 24 months and cost approximately $17.4 million. The DOE will contribute $5.0 million under the program, and the Company will incur approximately $12.4 million in research and development expense. As of September 30, 2010 the Company has not billed the DOE under this contract.

 

In November 2009, the Company was awarded a grant from the DOE for the research, development and testing of a fuel flexible microturbine capable of operating on a wider variety of biofuels. The project is estimated to last 24 months and cost approximately $3.8 million. The DOE will contribute $2.5 million under the program, and the Company will incur approximately $1.3 million in research and development expense. The Company billed the DOE under this contract a cumulative amount of $0.8 million through September 30, 2010.

 

Agreements the Company has with some of its distributors require that if the Company renders parts obsolete in inventories they own and hold in support of their obligations to serve fielded microturbines, the Company is then required to replace the affected stock at no cost to the distributors. While the Company has never incurred costs or obligations for these types of replacements, it is possible that future changes in the Company’s product technology could result and yield costs to the Company if significant amounts of inventory are held by distributors. As of September 30, 2010 and March 31, 2010, no significant inventories were held by distributors.

 

16


 


Table of Contents

 

Legal Matters

 

In December 2001, a purported stockholder class action lawsuit was filed in the United States District Court for the Southern District of New York (the “District Court”) against the Company, two of its then officers, and the underwriters of the Company’s initial public offering. The suit purports to be a class action filed on behalf of purchasers of the Company’s common stock during the period from June 28, 2000 to December 6, 2000. An amended complaint was filed on April 19, 2002. The plaintiffs allege that the prospectuses for the Company’s June 28, 2000 initial public offering and November 16, 2000 secondary offering were false and misleading in violation of the applicable securities laws because the prospectuses failed to disclose the underwriter defendants’ alleged agreement to allocate stock in these offerings to certain investors in exchange for excessive and undisclosed commissions and agreements to make additional purchases of stock in the aftermarket at pre-determined prices. Similar complaints have been filed against hundreds of other issuers that have had initial public offerings since 1998; the complaints have been consolidated into an action captioned In re Initial Public Offering Securities Litigation, No. 21 MC 92. On October 9, 2002, the plaintiffs dismissed, without prejudice, the claims against the named officers and directors in the action against the Company, pursuant to the terms of Reservation of Rights and Tolling Agreements entered into with the plaintiffs (the “Tolling Agreements”). Subsequent addenda to the Tolling Agreements extended the tolling period through August 27, 2010. The District Court directed that the litigation proceed within a number of “focus cases” and on October 13, 2004, the District Court certified the focus cases as class actions. The Company’s case is not one of these focus cases. The underwriter defendants appealed that ruling, and on December 5, 2006, the Court of Appeals for the Second Circuit reversed the District Court’s class certification decision. On August 14, 2007, the plaintiffs filed their second consolidated amended complaints against the six focus cases and on September 27, 2007, again moved for class certification. On November 12, 2007, certain of the defendants in the focus cases moved to dismiss the second consolidated amended class action complaints. On March 26, 2008, the District Court denied the motions to dismiss except as to Section 11 claims raised by those plaintiffs who sold their securities for a price in excess of the initial offering price and those who purchased outside the previously certified class period. The motion for class certification was withdrawn without prejudice on October 10, 2008. On April 2, 2009, a stipulation and agreement of settlement between the plaintiffs, issuer defendants and underwriter defendants was submitted to the District Court for preliminary approval. The District Court granted the plaintiffs’ motion for preliminary approval and preliminarily certified the settlement classes on June 10, 2009. The settlement “fairness” hearing was held on September 10, 2009. On October 6, 2009, the District Court entered an opinion granting final approval to the settlement and directing that the Clerk of the District Court close these actions. On August 26, 2010, based on the expiration of the tolling period stated in the Tolling Agreements, the plaintiffs filed a Notice of Termination of Tolling Agreement and Recommencement of Litigation against the named officers and directors. The plaintiffs stated to the Court that they do not intend to take any further action against the named officers and directors at this time. Notices of appeal of the opinion granting final approval have been filed. Because of the inherent uncertainties of litigation and because the settlement remains subject to appeal, the ultimate outcome of the matter is uncertain, and management believes that the outcome of this litigation will not have a material adverse impact on its consolidated financial position and results of operations.

 

On October 9, 2007, Vanessa Simmonds, a purported stockholder of the Company, filed suit in the U.S. District Court for the Western District of Washington (the “Washington District Court”) against The Goldman Sachs Group, Inc., Merrill Lynch & Co., Inc., and Morgan Stanley, the lead underwriters of the Company’s initial public offering in June 1999, and the Company’s secondary offering of common stock in November 2000, alleging violations of Section 16(b) of the Securities Exchange Act of 1934, 15 U.S.C. § 78p(b). The complaint sought to recover from the lead underwriters any “short-swing profits” obtained by them in violation of Section 16(b). The suit names the Company as a nominal defendant, contained no claims against the Company, and sought no relief from the Company. Simmonds filed an Amended Complaint on February 27, 2008 (the “Amended Complaint”), naming as defendants Goldman Sachs & Co. and Merrill Lynch Pierce, Fenner & Smith Inc. and again naming Morgan Stanley. The Goldman Sachs Group, Inc. and Merrill Lynch & Co., Inc. were no longer named as defendants. The Amended Complaint asserted substantially similar claims as those set forth in the initial complaint. On July 25, 2008, the Company joined with 29 other issuers to file the Issuer Defendants’ Joint Motion to Dismiss. Simmonds filed her opposition to this motion on September 8, 2008, and the Company and the other Issuer Defendants filed a Reply in Support of Their Joint Motion to Dismiss on October 23, 2008. On March 12, 2009, the Washington District Court granted the Issuer Defendants’ Joint Motion to Dismiss, dismissing the complaint without prejudice on the grounds that Simmonds had failed to make an adequate demand on the Company prior to filing her complaint. In its order, the Washington District Court stated that it would not permit Simmonds to amend her demand letters while pursuing her claims in the litigation. Because the Washington District Court dismissed the case on the grounds that it lacked subject matter jurisdiction, it did not specifically reach the issue of whether Simmonds’ claims were barred by the applicable statute of limitations. However, the Washington District Court also granted the Underwriters’ Joint Motion to Dismiss with respect to cases involving non-moving issuers, holding that the cases were barred by the applicable statute of limitations because the issuers’ stockholders had notice of the potential claims more than five years prior to filing suit. Simmonds filed a Notice of Appeal on April 10, 2009. The underwriters subsequently filed a Notice of Cross-Appeal, arguing that the dismissal of the claims involving the moving issuers

 

17



Table of Contents

 

should have been with prejudice because the claims were untimely under the applicable statute of limitations. Simmonds filed her opening brief on appeal on August 26, 2009. On October 2, 2009, the Company and other Issuer Defendants filed a joint response brief, and the underwriters filed a brief in support of their cross-appeal. Simmonds’ reply brief and opposition to the cross-appeal were filed on November 2, 2009 and the underwriters’ reply brief in support of their cross-appeals were filed on November 17, 2009. On October 5, 2010, the Ninth Circuit Court of Appeals heard oral arguments regarding this matter. A decision is not expected for at least six to 12 months. Management believes that the outcome of this litigation will not have a material adverse impact on its consolidated financial position and results of operations.

 

From time to time, the Company may become subject to additional legal proceedings, claims and litigation arising in the ordinary course of business. Other than the matters discussed above, the Company is not a party to any other material legal proceedings, nor is the Company aware of any other pending or threatened litigation that would have a material adverse effect on the Company’s business, operating results, cash flows or financial condition should such litigation be resolved unfavorably.

 

15.  Net Loss Per Common Share

 

Basic loss per share of common stock is computed using the weighted average number of common shares outstanding for the period. Diluted loss per share is computed without consideration to potentially dilutive instruments because the Company incurred losses in the three months ended September 30, 2010 which would make these instruments anti-dilutive. As of September 30, 2010 and 2009, the number of antidilutive stock options and restricted stock units excluded from diluted net loss per common share computations was approximately 12.3 million and 11.4 million, respectively. As of September 30, 2010 and 2009, the number of warrants excluded from diluted net loss per common share computations was approximately 34.1 million and 33.1 million, respectively.

 

16. Acquisition

 

On February 1, 2010 (the “Closing Date”), the Company acquired the TA100 microturbine generator product line (the “MPL”) from CPS to expand the Company’s microturbine product line and to gain relationships with distributors to supply the Company’s products. The Company entered into an Asset Purchase Agreement (“APA”), subject to an existing license retained by CPS, to purchase all of the rights and assets related to the manufacture and sale of the MPL, including intellectual property, design, tooling, drawings, patents, know-how, distribution and supply agreements.

 

The table below summarizes the consideration paid for the rights and assets of the MPL. No voting interests in CPS were acquired in this transaction.

 

Description

 

Purchase
Price

 

 

 

(In thousands)

 

Stock issued at Closing Date

 

$

1,798

 

Stock issued at Second Funding Date

 

2,990

 

Total purchase consideration

 

$

4,788

 

 

Pursuant to the APA, the Company issued to CPS 1,550,387 shares of common stock at the Closing Date and agreed to pay additional consideration of $3.1 million on July 30, 2010 (the “Second Funding Date”). The additional consideration was to be paid, at the Company’s discretion, in shares of the Company’s common stock or cash. The Company elected to satisfy the amount due on the Second Funding Date with common stock and issued 3,131,313 shares to CPS. This second payment constituted a financial instrument which was accounted for as a liability at fair value at the acquisition date in accordance with ASC 480, “Distinguishing Liabilities from Equity.” This liability was recorded at fair value on the Closing Date and was accreted to its full settlement value at the Second Funding Date by recording the increase to interest expense.

 

The Company determined that the CPS transaction constitutes a business combination in accordance with ASC 805, “Business Combinations.” The purchase price was allocated to the tangible and intangible assets acquired based on their estimated fair values on the acquisition date. The Company incurred $0.1 million of costs during Fiscal 2010 related to the acquisition of the MPL. These costs are recorded in selling, general and administrative expenses in the accompanying statement of operations.

 

18



Table of Contents

 

The following table presents the purchase price allocation:

 

Description

 

Purchase
Price

 

 

 

(In thousands)

 

Manufacturing equipment

 

$

292

 

Intangible Assets:

 

 

 

Technology

 

2,240

 

Parts/service customer relationships

 

1,080

 

TA100 customer relationships

 

617

 

Backlog

 

490

 

Trade name

 

69

 

Total purchase consideration

 

$

4,788

 

 

Acquired intangible assets have estimated useful lives between one and ten years. The fair value assigned to identifiable intangible assets acquired has been determined primarily by using the income approach. Purchased identifiable intangible assets, except for backlog, are amortized on a straight-line basis over their respective useful lives and classified as a component of cost of goods sold or selling, general and administrative expenses based on the function of the underlying asset. Backlog is amortized on a per unit basis as the backlog units are sold and presented as a component of cost of goods sold.

 

The financial activity of the MPL acquisition is included in the Company’s Statements of Operations for the six months ended September 30, 2010. Total revenue generated from the MPL during the six months ended September 30, 2010 was $2.0 million. The following pro forma financial information for the six months ended September 30, 2009 presents the results as if the MPL acquisition had occurred at the beginning of the year (in thousands):

 

 

 

Six Months
Ended September 30, 2009

 

Revenue

 

$

31,214

 

Net Loss

 

(47,656

)

 

Supply Agreement

 

On the Closing Date, the Company and CPS entered into a manufacturing supply agreement under which CPS will continue to manufacture the TA100 microturbines for the Company through March 31, 2011 (the “Transition Period”). During the Transition Period, CPS will lease from the Company on a royalty-free basis the intellectual property required to manufacture TA100 microturbines.

 

At the end of the Transition Period, the Company has agreed to purchase for cash any remaining TA100 microturbine inventory that has not been consumed as part of the TA100 manufacturing process and is not considered excess or obsolete and will obtain title to certain TA100 manufacturing equipment. The manufacturing equipment is accounted for as a capital lease at the acquisition date under ASC 840 “Leases” and recorded at fair value.

 

Original Equipment Manufacturer (“OEM”)Agreement

 

On the Closing Date, the Company also entered into an agreement with CPS to purchase 125 kW waste heat recovery generator systems from CPS. In exchange for certain minimum purchase requirements during a three-year period, the Company has exclusive rights to sell the zero-emission waste heat recovery generator for all microturbine applications and for applications 500 kW or lower where the source of heat is the exhaust of a reciprocating engine used in a landfill application. The Company must meet specified annual sales targets in order to maintain the exclusive rights to sell the waste heat recovery generators. The OEM agreement is being treated as a separate transaction from the MPL acquisition.

 

19



Table of Contents

 

Item 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion should be read in conjunction with the condensed consolidated financial statements and notes included in this Form 10-Q and in our Annual Report on Form 10-K for Fiscal 2010. When used in this Form 10-Q, and in the following discussion, the words “believes”, “anticipates”, “intends”, “expects” and similar expressions are intended to identify forward-looking statements. Such statements are subject to certain risks and uncertainties which could cause actual results to differ materially from those projected. These risks include those identified under Risk Factors in Item I.A. of this Form 10-Q, those under Risk Factors in our Annual Report on Form 10-K for Fiscal 2010 and in other reports we file with the SEC. Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date hereof. All dollar amounts are approximate.

 

Overview

 

We develop, manufacture, market and service microturbine technology solutions for use in stationary distributed power generation applications, including cogeneration (combined heat and power (“CHP”), integrated combined heat and power (“ICHP”) and combined cooling, heat and power (“CCHP”)), resource recovery and secure power. In addition, our microturbines can be used as battery charging generators for hybrid electric vehicle applications. Microturbines allow customers to produce power on-site in parallel with the electric grid or stand alone when no utility grid is available. There are several technologies which are used to provide “on-site power generation” (also called “distributed generation”), such as reciprocating engines, solar power, wind powered systems and fuel cells. For customers who do not have access to the electric utility grid, microturbines can provide clean, on-site power with lower scheduled maintenance intervals and greater fuel flexibility than competing technologies. For customers with access to the electric grid, microturbines can provide an additional source of continuous duty power, thereby providing additional reliability and potential cost savings. With our stand—alone feature, customers can produce their own energy in the event of a power outage and can use the microturbines as their primary source of power for extended periods. Because our microturbines also produce clean, usable heat energy, they provide economic advantages to customers who can benefit from the use of hot water, chilled water, air conditioning and heating. Our microturbines are sold primarily through our distributors. Our distributors, along with our Authorized Service Companies (“ASCs”), install the microturbines. Service is provided directly by us through our Factory Protection Plan (“FPP”) under which we charge a fixed annual fee to perform regularly scheduled maintenance, as well as other maintenance as needed, or by our distributors and ASCs. Successful implementation of microturbines relies on the quality of the microturbine, marketability for appropriate applications, and the quality of the installation and support.

 

We believe we were the first company to offer a commercially available power source using microturbine technology. We offer microturbines from 30 kilowatts (“kW”) up to 1 megawatt in electric power output, designed for commercial, industrial, and utility users. Our 30 kW (“C30”) microturbine can produce enough electricity to power a small convenience store. The 60 kW and 65 kW (“C60 Series”) microturbine can produce enough heat to provide hot water to a 100-room hotel while also providing about one-third of its electrical requirements. Our 200 kW (“C200”) microturbine is well suited for larger hotels, office buildings, and wastewater treatment plants, among others. By packaging the C200 microturbine power modules into an International Organization for Standardization (“ISO”) sized container, Capstone has created a family of microturbine offerings from 600 kW up to one megawatt in a compact footprint. Our 1000 kW (“C1000 Series”) microturbines are well suited for utility substations, larger commercial and industrial facilities and remote oil and gas applications. Our microturbines combine patented air-bearing technology, advanced combustion technology and sophisticated power electronics to form efficient and ultra low emission electricity and cooling and heat production systems. Because of our air-bearing technology, our microturbines do not require liquid lubricants. This means they do not require routine maintenance to change and dispose of oil or other liquid lubricants, as do the most common competing products. Capstone microturbines can be fueled by various sources including natural gas, propane, sour gas, renewable fuels such as landfill or digester gas, kerosene, diesel and biodiesel. The C60 Series and C200 microturbines are available with integrated heat exchangers, making them easy to engineer and install in applications where hot water is used. Our C60 Series was certified by the California Air Resources Board (“CARB”) to meet its stringent 2007 emissions requirements—the same emissions standard used to certify fuel cells and the same emissions levels as a state-of-the-art central power plant. Our C65 Landfill and Digester Gas systems were certified in January 2008 by CARB to meet 2008 waste gas emissions requirements for landfill and digester gas applications. In March 2009, our 30-kilowatt microturbines successfully demonstrated ultra-low emissions by complying with the Environmental Protection Agency and CARB 2010 emissions requirements which reduced previous requirements for NOx by 86%, carbon monoxide (CO) by 98%, and volatile organic compounds (VOCs) by 98%.

 

20



Table of Contents

 

On February 1, 2010, we entered into an Asset Purchase Agreement with Calnetix Power Solutions, Inc. (“CPS”). The Company acquired, subject to an existing license retained by CPS, all of the rights and assets related to the manufacture and sale of the CPS 100 kW (“TA100”) microturbine generator, including intellectual property, design, tooling, drawings, patents, know-how, distribution agreements and supply agreements. Pursuant to the transaction, on February 1, 2010, the Company issued to CPS 1,550,387 shares of common stock of the Company and agreed to pay additional consideration of $3.1 million on July 30, 2010.  On July 30, 2010, the Company issued to CPS 3,131,313 shares of common stock of the Company in lieu of cash consideration. CPS will continue to manufacture the TA100 microturbines for Capstone through March 31, 2011. We have agreed to purchase for cash any remaining TA100 microturbine inventory remaining after March 31, 2011 that has not been consumed as part of the TA100 manufacturing process and is not considered excess or obsolete, and we will obtain title to certain TA100 manufacturing equipment. On the closing date of February 1, 2010, the Company and CPS also entered into an agreement pursuant to which we agreed to purchase 125 kW waste heat recovery generator systems from CPS. In exchange for certain minimum purchase requirements during a three-year period, we have exclusive rights to sell the zero-emission waste heat recovery generator for all microturbine applications and for applications 500 kW or lower where the source of heat is the exhaust of a reciprocating engine used in a landfill application. We must meet specified annual sales targets in order to maintain the exclusive rights to sell the waste heat recovery generators.

 

In order to increase volume and reduce cost, we focus our efforts in vertical markets that we expect to generate repeat business for the Company. To support our opportunities to grow in these markets, we continue to enhance the reliability and performance of our products by regularly developing new processes and enhancing training to assist those who apply, install and use our products.

 

An overview of our direction, targets and key initiatives follows:

 

1)              Focus on Vertical Markets— Within the distributed generation markets that we serve, we focus on vertical markets that we identify as having the greatest near-term potential. In our primary products and applications (CHP and CCHP, resource recovery, hybrid electric vehicles and secure power), we identify specific targeted vertical market segments. Within each of these segments, we identify what we believe to be the critical factors to success and base our plans on those factors.

 

During the three months ended September 30, 2010, we booked total orders of $14.4 million for 138 units, or 14.8 megawatts, compared to $12.7 million for 129 units, or 13.2 megawatts, during the three months ended September 30, 2009. During the three months ended September 30, 2010, we shipped 174 units with an aggregate of 15.8 megawatts, generating revenue of $15.5 million compared to 138 units with an aggregate of 13.7 megawatts, generating revenue of $12.5 million during the three months ended September 30, 2009. Total backlog as of September 30, 2010 increased $24.2 million, or 41%, to $83.5 million from $59.3 million as of September 30, 2009. As of September 30, 2010, we had 667 units, or 93.4 megawatts, in total backlog compared to 602 units, or 66.9 megawatts, as of September 30, 2009. As of September 30, 2010, all of the backlog was current and expected to be shipped within the next twelve months compared to 503 units, or 64.0 megawatts, valued at $55.9 million as of September 30, 2009. The timing of shipments is subject to change based on several variables (including customer payments and changes in customer delivery schedules), many of which are not in our control and can affect our quarterly revenue and backlog. During the three months ended June 30, 2010, we booked our first order for 14 waste heat recovery generators, of which 12 waste heat recovery generators are reflected in the ending backlog as of September 30, 2010. Additionally, during the three months ended June 30, 2010, we booked orders for four unit upgrades and shipped one unit upgrade. The remaining three unit upgrades were shipped during the three months ended September 30, 2010. Unit upgrades consist of a C200 engine, electronics and installation hardware for populating a vacant compartment in a C600 or C800 system. For example, adding two unit upgrades to a C600 would convert the system into a C1000 system. Our actual product shipments during the three months ended September 30, 2010 were: 23% for use in CHP applications, 1% for use in CCHP applications, 16% for use in resource recovery applications and 60% for use in other applications (including hybrid electric vehicles and secure power).

 

21



Table of Contents

 

The following table summarizes our backlog:

 

 

 

As of September 30,

 

 

 

2010

 

2009

 

 

 

Megawatts

 

Units

 

Megawatts

 

Units

 

Current

 

 

 

 

 

 

 

 

 

C30

 

4.1

 

137

 

6.9

 

230

 

C60 Series

 

23.6

 

363

 

11.3

 

174

 

TA100

 

5.2

 

52

 

 

 

C200

 

10.2

 

51

 

12.6

 

63

 

C600

 

3.6

 

6

 

1.8

 

3

 

C800

 

3.2

 

4

 

6.4

 

8

 

C1000

 

42

 

42

 

25.0

 

25

 

Waste heat recovery generator

 

1.5

 

12

 

 

 

Total Current Backlog

 

93.4

 

667

 

64.0

 

503

 

Long-term

 

 

 

 

 

 

 

 

 

C30

 

 

 

2.9

 

99

 

Total Long-term Backlog

 

 

 

2.9

 

99

 

 

 

 

 

 

 

 

 

 

 

Total Backlog

 

93.4

 

667

 

66.9

 

602

 

 

2)              Sales and Distribution Channels— We seek out distributors and representatives that have business experience and capabilities to support our growth plans in our targeted markets. In North America, we currently have 35 distributors and Original Equipment Manufacturers (“OEMs”). Internationally, outside of North America, we currently have 58 distributors and OEMs. We continue to refine the distribution channels to address our specific targeted markets.

 

3)              Service—We serve our customers directly and through qualified distributors and ASCs, all of whom will perform their service work using technicians specifically trained by Capstone. We offer a comprehensive FPP where Capstone charges a fixed annual fee to perform regularly scheduled maintenance, as well as other maintenance as needed. Capstone then performs the required maintenance directly with its own personnel, or contracts with one of its local ASCs to do so. Capstone provides factory and on-site training to certify all personnel that are allowed to perform service on our microturbines. Individuals who are certified are called Authorized Service Providers (“ASPs”) and must be employed by an ASC in order to perform work pursuant to a Capstone FPP. The majority of our distributors are ASCs. FPPs are generally paid quarterly in advance. Our FPP backlog as of September 30, 2010 was $23.5 million which represents the value of the contractual agreement for FPP services that has not been earned and extends through Fiscal 2025.

 

4)              Product Robustness and Life Cycle Maintenance Costs— To provide us with the ability to evaluate microturbine performance in the field, we developed a “real-time” remote monitoring and diagnostic feature. This feature allows us to monitor installed units and rapidly collect operating data on a continual basis. We use this information to anticipate and more quickly respond to field performance issues, evaluate component robustness and identify areas for continuous improvement. This feature is important in allowing us to better serve our customers.

 

5)              New Product Development— Our new product development is targeted specifically to meet the needs of our selected vertical markets. We expect that our existing product platforms, the C30, C60 Series, TA100, C200 and C1000 Series microturbines, will be our foundational product lines for the foreseeable future. Our product development efforts are centered on enhancing the features of these base products. Our C200 product beta testing was successfully implemented during Fiscal 2005 and the first commercial shipment was on August 28, 2008. Our C1000 Series product was developed based on Capstone’s C200 microturbine product line. This product family can be configured into 1,000 kW, 800 kW and 600 kW solutions in a single ISO-sized container. Our C1000 product beta testing was successfully implemented during Fiscal 2009 and the first commercial shipment was on December 29, 2008.

 

6)              Cost and Core Competencies— We are continuing to make progress towards achieving cost improvement goals through design changes, robotics, parts commonality, tier one suppliers and lower cost offshore suppliers. In conjunction with these changes, we launched a strategic supply chain initiative to develop suppliers on a global basis. We continue to review avenues for cost reduction by sourcing to the best value supply chain option. We have made progress diversifying our suppliers internationally and within the United States. Management expects to continue leveraging our costs as product volumes increase.

 

22



Table of Contents

 

Management believes that effective execution in each of these key areas will be necessary to leverage Capstone’s promising technology and early market leadership into achieving positive cash flow with growing market presence and improving financial performance. Based on our recent progress and assuming achievement of targeted cost reductions, our financial model indicates that we will achieve positive cash flow when we ship approximately 200 units in a quarter, dependent on an assumed product mix, which is not reflective of what is in our current backlog. Management believes our manufacturing facilities located in Chatsworth and Van Nuys, California have a combined production capacity of approximately 2,000 units per year, depending on product mix. Excluding working capital requirements, management believes we can expand our combined production capacity to approximately 4,000 units per year, depending on product mix, with approximately $10 to $15 million of capital expenditures. We have not committed to this expansion nor identified a source for its funding, if available.

 

Critical Accounting Policies and Estimates

 

The preparation of our condensed consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses. Management believes the most complex and sensitive judgments, because of their significance to the condensed consolidated financial statements, result primarily from the need to make estimates about the effects of matters that are inherently uncertain. Actual results could differ from management’s estimates. Management believes the critical accounting policies listed below affect our more significant accounting judgments and estimates used in the preparation of the condensed consolidated financial statements. These policies (except as noted below) are described in greater detail in our Annual Report on Form 10-K for Fiscal 2010 and continue to include the following areas:

 

·

 

Impairment of long-lived assets, including intangible assets with finite lives;

 

 

 

·

 

Inventory write-downs and classification of inventories;

 

 

 

·

 

Estimates of warranty obligations;

 

 

 

·

 

Allowance for doubtful accounts;

 

 

 

·

 

Deferred tax assets and valuation allowance;

 

 

 

·

 

Stock-based compensation expense;

 

 

 

·

 

Loss contingencies; and

 

 

 

·

 

Fair value of financial instruments.

 

Results of Operations

 

Three Months Ended September 30, 2010 and 2009

 

Revenue.  Revenue is reported net of allowances. Revenue for the three months ended September 30, 2010 increased $3.4 million, or 22%, to $18.9 million from $15.5 million for the three months ended September 30, 2009. The change in revenue for the three months ended September 30, 2010 compared to the three months ended September 30, 2009 included a $2.7 million increase in revenue from the European market, a $2.5 million increase in revenue from the North American market, $0.3 million increase in revenue from the Australian market and a $0.2 million increase in revenue from the African market, all primarily the result of our efforts to improve distribution channels, offset by a $1.9 million decrease in revenue from the South American market and a $0.4 million decrease in revenue from the Asian market because of lower order volume in the regions.

 

Overall microturbine product shipments were 36 units (2.1 megawatts) higher during the three months ended September 30, 2010 compared to the three months ended September 30, 2009, totaling 174 units (15.8 megawatts) and 138 units (13.7 megawatts), respectively. Megawatts shipped and revenue during the three months ended September 30, 2010 increased as a result of higher sales volume of our C60 Series microturbine, the sale of ten C60 Series microturbine rental units, the introduction of our new TA100 and further market adoption of our C200 and C1000 Series product lines. Additionally, during the three months ended September 30, 2010, we shipped our first order for two waste heat recovery generators.

 

Average revenue per unit during each of the three months ended September 30, 2010 and 2009 was approximately $90,000, respectively.

 

23



Table of Contents

 

For the three months ended September 30, 2010, a shortage in certain key parts delayed our ability to ship products as scheduled.  The timing of shipments is subject to change based on several variables (including customer payments and customer delivery schedules), some of which are not within our control and can affect our quarterly revenue and backlog. As a result of such issues, we evaluate historical revenue in conjunction with backlog to anticipate the growth trend of our revenue.

 

The following table summarizes our revenue (revenue amounts in millions):

 

 

 

Three Months Ended September 30,

 

 

 

2010

 

2009

 

 

 

Revenue

 

Megawatts

 

Units

 

Revenue

 

Megawatts

 

Units

 

C30

 

$

2.5

 

1.8

 

61

 

$

2.5

 

1.9

 

63

 

C60 Series

 

5.8

 

5.8

 

89

 

4.1

 

4.2

 

64

 

TA100

 

0.6

 

0.5

 

5

 

 

 

 

C200

 

1.6

 

1.8

 

9

 

0.7

 

0.6

 

3

 

C600

 

1.0

 

1.2

 

2

 

0.5

 

0.6

 

1

 

C800

 

 

 

 

1.8

 

2.4

 

3

 

C1000 Series

 

3.2

 

4.0

 

4

 

2.9

 

4.0

 

4

 

Waste heat recovery generator

 

0.4

 

0.3

 

2

 

 

 

 

Unit upgrades

 

0.4

 

0.4

 

2

 

 

 

 

Total from Microturbine Products

 

$

15.5

 

15.8

 

174

 

$

12.5

 

13.7

 

138

 

Accessories, Parts and Service

 

3.4

 

 

 

3.0

 

 

 

Total

 

$

18.9

 

15.8

 

174

 

$

15.5

 

13.7

 

138

 

 

Sales to Aquatec-Maxcon Pty Ltd. (“Aquatec”), the Company’s Australian distributor, Pumps and Service Company(“Pumps and Service”), one of the Company’s domestic distributors, and Banking Production Centre (“BPC”), one of the Company’s Russian distributors, accounted for 14%, 13% and 11% of revenue for the three months ended September 30, 2010, respectively. Sales to BPC, Aquatec, and Fluxo Soluçôes Intergradas Ltda, the Company’s Brazilian distributor, accounted for 20%, 14% and 12% of revenue for the three months ended September 30, 2009, respectively.

 

Gross Margin (Loss). Cost of goods sold includes direct material costs, production and service center overhead, inventory charges and provision for estimated product warranty expenses. The gross margin was $0.1 million, or 1% of revenue, during the three months ended September 30, 2010 compared to a gross loss of $3.0 million, or 19% of revenue, during the three months ended September 30, 2009. The improvement in gross margin of $3.1 million was the result of $2.6 million related to a change in product mix, which includes higher sales of our C60 Series and C200 systems, introduction of our new TA100 and initial sales of the waste heat recovery generator and unit upgrades during the three months ended September 30, 2010. In addition, the C200 and C1000 series systems had a higher margin than in the same period last year, when these products had low introductory pricing and higher than planned product cost. The $3.1 million improvement in gross margin also reflected a decrease in warranty expense of $0.2 million and a $0.3 million decrease in inventory charges.

 

Inventory charges decreased $0.3 million during the three months ended September 30, 2010 as compared to the three months ended September 30, 2009 as the Company reduced its charges related to scrap and yield issues in the manufacturing process of the C200 and C1000 Series products from the prior year.

 

Warranty expense is a combination of a per-unit warranty accrual recorded at the time revenue is recognized and changes, if any, in estimates for warranty programs. Warranty programs are estimates that are recorded in the period that new information becomes available, including design changes, cost of repair and product enhancements, which can include both in-warranty and out-of-warranty systems. The decrease in warranty expense consisted of a $0.4 million decrease in per-unit warranty accrual offset by a $0.2 million increase in warranty programs compared to the prior year period because of a benefit recorded in the prior period. The benefit resulted from warranty program reductions for units subsequently covered by factory protection plans and our expectation that units will operate beyond the estimated warranty failure period. There was no such benefit during the three months ended September 30, 2010.

 

Management has taken initiatives to further reduce direct material costs and other manufacturing and warranty costs as we work to achieve profitability.

 

Research and Development (“R&D”) Expenses. R&D expenses include labor costs, engineering department expenses, overhead allocations for administration and facilities and materials costs associated with development. R&D expenses for the three months ended September 30, 2010 decreased $0.3 million, or 13%, to $2.0 million from $2.3 million for the three months ended September 30, 2009. R&D expenses are reported net of benefits from cost—sharing programs, such as Department of Energy (“DOE”) grants and UTCP funding. There were approximately $0.2 million of such benefits for the three months ended September 30, 2010 and no such benefits for the three months ended September 30, 2009. There were no in—kind services performed under the cost—sharing programs during the three months ended September 30, 2010 or 2009. The overall decrease in R&D expenses of $0.3 million resulted from decreased supplies expense of $0.3 million. The UTCP cost-sharing program concluded in June 2009. Cost—sharing programs vary from period to period depending on the phases of the programs. Management expects R&D expenses in Fiscal 2011 to be slightly lower than in Fiscal 2010.

 

24



Table of Contents

 

Selling, General, and Administrative (“SG&A”) Expenses. SG&A expenses decreased $0.2 million, or 3%, to $6.6 million for the three months ended September 30, 2010 from $6.8 million for the three months ended September 30, 2009. The net decrease in SG&A expenses was comprised of a decrease of $0.5 million related to consulting expense and $0.1 million in professional services expense, which includes accounting, legal and insurance expense, offset by an increase of $0.3 million in facilities expense and $0.1 million related to travel expense. Management expects SG&A expenses in Fiscal 2011 to be slightly lower than in Fiscal 2010.

 

Interest Income. Interest income was $2,000 during the three months ended September 30, 2010. There was no interest income during the three months ended September 30, 2009. The increase during the period was attributable to higher average cash balances and more cash held in interest-bearing accounts. Management expects interest income in Fiscal 2011 to be lower than in Fiscal 2010 as we continue to use cash to support our operations.

 

Interest Expense. Interest expense increased $0.1 million, or 100%, to $0.2 million for the three months ended September 30, 2010 from $0.1 million for the three months ended September 30, 2009. The increased interest expense resulted from higher average balances outstanding under the revolving Credit Facility. As of September 30, 2010, we had total debt of $7.4 million outstanding under the revolving Credit Facility.

 

Change in Fair Value of Warrant Liability. The change in fair value of the warrant liability was a benefit of $6.9 million for the three months ended September 30, 2010. The change in fair value of the warrant liability was a charge of $19.6 million for the three months ended September 30, 2009. In accordance with ASC 815, adopted in Fiscal 2010, warrants previously classified within equity were reclassified as liabilities. This change in fair value of warrant liability was a result of revaluing the warrant liability based on the Black—Scholes valuation model and the quoted price of the Company’s common stock in an active market. When the quoted price of the Company’s stock increases from the prior period, a charge will be recorded. Conversely, when the quoted price of the Company’s stock decreases, a benefit will be recorded. This revaluation has no impact on the Company’s cash balances.

 

Income Taxes. Income tax expense during each of the three months ended September 30, 2010 and 2009 was approximately $0.1 million. Income tax expense is related to service activity in Mexico that exceeded certain thresholds.

 

Six Months Ended September 30, 2010 and 2009

 

Revenue.  Revenue for the six months ended September 30, 2010 increased $5.7 million, or 20%, to $34.9 million from $29.2 million for the same period last year. The change in revenue for the six months ended September 30, 2010 compared to the six months ended September 30, 2009 included a $5.3 million increase in revenue from the European market, a $3.1 million increase in revenue from the North American market, a $0.6 million increase in revenue from the Asian market and a $0.2 million increase in revenue from the African market, all primarily the result of efforts to improve distribution channels. This overall increase in revenue was offset by a $1.9 million decrease in revenue from the South American market and a $1.6 million decrease in revenue from the Australia market because of lower order volume in the regions.

 

Overall microturbine product shipments were 54 units (3.7 megawatts) higher during the six months ended September 30, 2010 compared to the six months ended September 30, 2009, totaling 272 units (29.2 megawatts) and 218 units (25.5 megawatts), respectively. Megawatts shipped and revenue during the six months ended September 30, 2010 increased as a result of the introduction of our new TA100, higher sales volume of our C60 Series microturbine, the sale of ten microturbine rental units and further market adoption of our C200 and C1000 Series product lines. Additionally, during the six months ended September 30, 2010, we shipped our first order for two waste heat recovery generators.

 

Average revenue per unit during each of the six months ended September 30, 2010 and 2009 was approximately $0.1 million.

 

For the six months ended September 30, 2010, a shortage in certain key parts delayed our ability to ship products as scheduled.  The timing of shipments is subject to change based on several variables (including customer payments and customer delivery schedules), some of which are not in our control and can affect our quarterly revenue and backlog. As a result of such issues,, we evaluate historical revenue in conjunction with backlog to anticipate the growth trend of our revenue.

 

25



Table of Contents

 

The following table summarizes our revenue:

 

 

 

Six Months Ended September 30,

 

 

 

2010

 

2009

 

 

 

Revenue

 

Megawatts

 

Units

 

Revenue

 

Megawatts

 

Units

 

C30

 

$

3.7

 

2.7

 

91

 

$

3.1

 

2.4

 

79

 

C60 Series

 

8.8

 

8.7

 

133

 

7.5

 

7.7

 

117

 

TA100

 

2.0

 

1.5

 

15

 

 

 

 

C200

 

3.0

 

2.8

 

14

 

1.2

 

1.2

 

6

 

C600

 

1.6

 

1.8

 

3

 

1.0

 

1.2

 

2

 

C800

 

0.6

 

0.8

 

1

 

3.0

 

4.0

 

5

 

C1000 Series

 

7.4

 

10.0

 

10

 

6.9

 

9.0

 

9

 

Waste heat recovery generator

 

0.4

 

0.3

 

2

 

 

 

 

Unit upgrades

 

0.7

 

0.6

 

3

 

 

 

 

Total from Microturbine Products

 

$

28.2

 

29.2

 

272

 

$

22.7

 

25.5

 

218

 

Accessories, Parts and Service

 

6.7

 

 

 

6.5

 

 

 

Total

 

$

34.9

 

29.2

 

272

 

$

29.2

 

25.5

 

218

 

 

Sales to BPC and Pumps and Service accounted for 21% and 10% of revenue for the six months ended September 30, 2010, respectively. Sales to BPC and Aquatec accounted for 23% and 16% of revenue for the six months ended September 30, 2009, respectively.

 

Gross Loss. The gross loss was $0.4 million, or 1% of revenue, for the six months ended September 30, 2010 compared to $5.8 million, or 20% of revenue, for the six months ended September 30, 2009. The improvement of gross loss of $5.4 million was the result of $4.8 million related to a change in product mix, which includes the TA100. In addition, we sold more microturbine products during the six months ended September 30, 2010. The C200 and C1000 series systems had a higher margin than in the same period last year, when these products had low introductory pricing and higher than planned product cost. The $5.4 million improvement in gross loss also reflected a $1.1 million decrease in inventory charges offset by an increase in warranty expense of $0.5 million.

 

Inventory charges decreased $1.1 million during the six months ended September 30, 2010 compared to the six months ended September 30, 2009 as the Company reduced its charges related to scrap and yield issues in the manufacturing process of the C200 and C1000 Series products from the prior year.

 

The increase in warranty expense of $0.5 million consisted of a $0.8 million increase in warranty programs compared to the prior year period because of a higher benefit recorded in the prior year period. The benefit resulted from warranty program reductions for units subsequently covered by factory protection plans and our expectation that units will operate beyond the estimated warranty failure period. There was no such benefit during the six months ended September 30, 2010. The increase in warranty programs above was offset by a $0.3 million decrease in per-unit warranty accrual.

 

Management has taken initiatives to further reduce direct material costs and other manufacturing and warranty costs as we work to achieve profitability.

 

Research and Development Expenses. R&D expenses for the six months ended September 30, 2010 increased $0.6 million, or 20%, to $3.6 million from $3.0 million for the six months ended September 30, 2009. R&D expenses are reported net of benefits from cost-sharing programs, such as DOE grants and UTCP funding. There were approximately $0.4 million of such benefits for the six months ended September 30, 2010 and $1.3 million of such benefits for the six months ended September 30, 2009. There were no in—kind services performed under the cost—sharing programs during the six months ended September 30, 2010 or 2009. The overall increase in R&D expenses of $0.6 million resulted from reduced benefits of $0.9 million from cost—sharing programs, offset by decreased spending for consulting fees of $0.2 million and supplies of $0.1 million. The UTCP cost-sharing program concluded in June 2009. Cost-sharing programs vary from period to period depending on the phases of the programs. Management expects R&D costs in Fiscal 2011 to be slightly lower than in Fiscal 2010.

 

Selling, General, and Administrative Expenses. We had SG&A expenses of approximately $13.1 million for each of the six months ended September 30, 2010 and 2009. During the six months ended September 30, 2010, consulting expense decreased $0.7 million, while facility expense increased $0.4 million and travel related expense increased $0.3 million. Management expects SG&A costs in Fiscal 2011 to be slightly lower than in Fiscal 2010.

 

26


 


Table of Contents

 

Interest Income. Interest income decreased $6,000, or 75%, to $2,000 for the six months ended September 30, 2010 from $8,000 for the six months ended September 30, 2009. The decrease in interest income was attributable to a general decline in market interest rates that resulted in lower yields earned on our cash and cash equivalents in comparison to interest income in the same period last year. Management expects interest income in Fiscal 2011 to be lower than in Fiscal 2010 as we continue to use cash to support our operations.

 

Interest Expense. Interest expense increased $0.2 million, or 67%, to $0.5 million for the six months ended September 30, 2010 from $0.3 million for the six months ended September 30, 2009. The increased interest expense resulted from higher average balances outstanding under the revolving Credit Facility. As of September 30, 2010, we had total debt of $7.4 million outstanding under the revolving Credit Facility.

 

Change in Fair Value of Warrant Liability. The change in fair value of the warrant liability was a benefit of $16.2 million for the six months ended September 30, 2010. The change in fair value of the warrant liability was a charge of $24.8 million for the six months ended September 30, 2009. In accordance with ASC 815, adopted in Fiscal 2010, warrants previously classified within equity were reclassified as liabilities. This change in fair value of warrant liability is a result of revaluing the warrant liability based on the Black-Scholes valuation model and the quoted price of the Company’s common stock in an active market. This revaluation has no impact on the Company’s cash balances.

 

Income Taxes. We had income tax expense of approximately $0.2 million for each of the six months ended September 30, 2010 and 2009. Income tax expense was related to service activity in Mexico that exceeded certain thresholds.

 

Liquidity and Capital Resources

 

Our cash requirements depend on many factors, including the execution of our plan. We expect to continue to devote substantial capital resources to running our business and creating the strategic changes summarized herein. Our planned capital expenditures for Fiscal 2011 include approximately $2.0 million for rental units and plant and equipment costs related to manufacturing and operations. The majority of the $2.0 million relates to the rental units, which can be built primarily from inventory on hand. We have invested our cash in institutional funds that invest in high quality short-term money market instruments to provide liquidity for operations and for capital preservation.

 

Our cash and cash equivalent balances decreased $27.0 million during the six months ended September 30, 2010, compared to an increase of $4.5 million during the six months ended September 30, 2009. The cash was used in:

 

Operating Activities.  During the six months ended September 30, 2010, we used $21.2 million in cash in our operating activities, which consisted of a net loss for the period of $1.5 million, non-cash adjustments (primarily change in fair value of warrant liability, employee stock-based compensation, depreciation and amortization, warranty and inventory charges) of $11.8 million and cash used for working capital of $7.9 million. During the six months ended September 30, 2009, operating cash usage was $16.9 million, which consisted of a net loss for the period of $47.1 million offset by non-cash adjustments of $29.6 million and cash from working capital of $0.6 million.

 

The net decrease in the change between the six months ended September 30, 2010 and the six months ended September 30, 2009 in working capital of $8.5 million, was primarily attributable to the change in accounts receivable which decreased by $1.9 million because of the timing of collections and higher sales occurring at the end of the period. Additionally, the change in working capital was attributable to the change in inventory which had decreased $2.4 million because of higher inventory levels in the six months ended September 30, 2009 and the change in net accounts payable and accrued expenses decreased $3.6 million because of higher purchases of inventory in the six months ended September 30, 2009. Company initiatives to reduce inventory resulted in a reduction in inventory levels for the six months ended September 30, 2009 compared to the six months ended September 30, 2010. Additionally, the change in working capital was attributable to the change in prepaid expenses and other current assets which decreased $1.4 million. Additionally, the change in working capital cash usage is attributable to a $0.8 million increased in the change of other current liabilities because of the completion of certain UTCP Development Agreement milestones during the first quarter of Fiscal 2010.

 

Investing Activities.  Net cash used in investing activities of $5.6 million during the six months ended September 30, 2010 relates primarily to restricted cash of $5.0 million. As a condition of the amended Agreements with Wells Fargo, we have restricted $5.0 million of cash as additional security for the Credit Facility. In addition, we used $0.6 million for the acquisition of fixed assets during the six months ended September 30, 2010. We used $1.1 million for the acquisition of fixed assets during the first quarter of Fiscal 2010.

 

Financing Activities.  During the six months ended September 30, 2010, we used $0.2 million in financing activities compared to cash generated during the six months ended September 30, 2009 of $22.4 million. The funds used in financing activities during the six months ended September 30, 2010 were primarily used to repay credit facility obligations to Wells Fargo. Net repayments of credit facility obligations were $0.1 million during the six months ended September 30, 2010 compared with net borrowing of $4.2 million during the six months ended September 30, 2009.

 

27



Table of Contents

 

The funds generated from financing activities during the six months ended September 30, 2009 were primarily the result of warrant exercises, sale of warrants and a registered offering of our common stock and warrants, which were completed effective September 17, 2009 and May 7, 2009, respectively. The exercise of warrants and sale of warrants in September 2009 resulted in gross proceeds of approximately $6.5 million and $0.4 million, respectively. The offering of our common stock and warrants in May 2009 resulted in gross proceeds of approximately $12.5 million and proceeds, net of direct transaction costs, of approximately $11.2 million.

 

Employee stock purchases, net of repurchases of shares of our common stock for employee taxes due on vesting of restricted stock units, resulted in a slight amount of cash generated during the six months ended September 30, 2010, compared with $0.1 million of cash during the six months ended September 30, 2009. During the six months ended September 30, 2010 and 2009, we generated additional financing from the Credit Facility (defined below) by drawing down our line of credit when funds were available.

 

We maintain two Credit and Security Agreements (the “Agreements”) with Wells Fargo. The Agreements provide the Company with a line of credit of up to $10 million in the aggregate (the “Credit Facility”). The amount actually available to us may be less and may vary from time to time depending on, among other factors, the amount of eligible inventory and accounts receivable. As security for the payment and performance of the Credit Facility, we granted a security interest in favor of Wells Fargo in substantially all of our assets. As of September 30, 2010, the Company had a standby letter of credit for one of its customers in the amount of $0.5 million. This letter of credit limits the amount the Company can borrow on its Credit Facility with Wells Fargo. The Agreements will terminate in accordance with their terms on February 9, 2012 unless terminated sooner. As of September 30, 2010 and March 31, 2010, $7.4 million and $7.6 million in borrowings were outstanding, respectively, under the Credit Facility.

 

The Agreements include affirmative covenants as well as negative covenants that prohibit a variety of actions without Wells Fargo’s consent, including covenants that limit our ability to (a) incur or guarantee debt, (b) create liens, (c) enter into any merger, recapitalization or similar transaction or purchase all or substantially all of the assets or stock of another entity, (d) pay dividends on, or purchase, acquire, redeem or retire shares of, our capital stock, (e) sell, assign, transfer or otherwise dispose of all or substantially all of our assets, (f) change our accounting method or (g) enter into a different line of business. Furthermore, the Agreements contain financial covenants, including (a) a requirement to maintain a specified minimum book worth, (b) a requirement not to exceed specified levels of losses, (c) a requirement to maintain a specified ratio of minimum cash balances to unreimbursed line of credit advances, and (d) limitations on our capital expenditures.

 

As of March 31, 2010, we determined that we were not in compliance with the financial covenant in the Agreements regarding our net income. On May 11, 2010, we received a notice of default from Wells Fargo related to our noncompliance. As a result, Wells Fargo imposed default pricing of an additional 3.0% effective March 1, 2010. On June 11, 2010, we received from Wells Fargo a waiver of our noncompliance with the financial covenant as of March 31, 2010 and amended the Agreements to set the covenants for Fiscal 2011. As a condition of the amended Agreements, we had restricted $5.0 million of cash effective June 11, 2010 as additional security for the Credit Facility. We are in discussions with Wells Fargo pertaining to the release of the restricted cash and expect that Wells Fargo will release one-half of the restricted cash in the quarter ending December 31, 2010 with the remainder to be released in equal parts upon confirming covenant compliance after each of the next two quarters. If we had not obtained the waiver and amended the Agreements, we would not be able to draw additional funds under the Credit Facility. In addition, we have pledged our accounts receivables, inventories, equipment, patents and other assets as collateral under the Agreements, which would be subject to seizure by Wells Fargo if we were in default under the Agreements and unable to repay the indebtedness. Wells Fargo also has the option to terminate the Agreements or accelerate the indebtedness during a period of noncompliance. As of September 30, 2010, we were in compliance with the covenants contained in the amended Agreements and based on our current forecasts we believe we will maintain compliance with the covenants through the end of Fiscal 2011.

 

On June 29, 2010, the Company entered into a Fourth Amendment to the Agreements (the “Fourth Amendment”) with Wells Fargo. The Fourth Amendment amended the financial covenant related to capital expenditures by adding a limitation on expenditures for Fiscal 2011. Under the terms of the Fourth Amendment, the Company may not incur or contract to incur capital expenditures of more than (i) $4.5 million in the aggregate during Fiscal 2011, and (ii) zero for each subsequent year until the Company and Wells Fargo agree on limits on capital expenditures for subsequent periods based on the Company’s projections for such periods.

 

Except for scheduled payments made on operating leases during the first quarter of Fiscal 2011, there have been no material changes in our remaining commitments under non-cancelable operating leases disclosed in our Annual Report on Form 10-K for Fiscal 2010.

 

Although we have made progress on direct material cost reduction efforts, we were behind schedule in reducing costs at the end of the second quarter of Fiscal 2011. In addition, our working capital requirements are higher than planned primarily because of slower collection of accounts receivable and lower than anticipated inventory turns. Further, we have not been able to fully achieve our planned number of product shipments partly as a result of a shortage in certain key supplies. If we are unable to improve our performance in the areas discussed above and successfully obtain a release of all or a portion of the restricted cash from Wells Fargo, we may need to raise additional funds in the near term. We could seek to raise such funds by selling additional securities to the public or to selected investors, or by obtaining additional debt financing. We cannot be

 

28



Table of Contents

 

assured that we will be able to obtain additional funds on commercially favorable terms, or at all. If we raise additional funds by issuing additional equity or convertible debt securities, the ownership percentages of existing stockholders would be reduced (on a fully diluted basis in the case of convertible securities). In addition, the equity or debt securities that we issue may have rights, preferences or privileges senior to those of the holders of our common stock.

 

Depending on the timing and product mix of our future sales and collection of related receivables, our management of inventory costs and the timing of inventory purchases and deliveries required to fulfill the current backlog, our future capital requirements may vary materially from those now planned. The amount of capital that we will need in the future will require us to achieve dramatically increased sales volume which is dependent on many factors, including:

 

·

 

the market acceptance of our products and services;

 

 

 

·

 

our business, product and capital expenditure plans;

 

 

 

·

 

capital improvements to new and existing facilities;

 

 

 

·

 

our competitors’ response to our products and services;

 

 

 

·

 

our relationships with customers, distributors, dealers and project resellers; and

 

 

 

·

 

our customers’ ability to afford and/or finance our products.

 

Additionally, the continued credit difficulties in the markets could prevent our customers from purchasing our products or delay their purchases, which would adversely affect our business, financial condition and results of operations. We have substantial accounts receivable as evidenced by days sales outstanding, or DSO, of 93 days as of September 30, 2010.  No assurances can be given that future bad debt expense will not increase above current operating levels.  Increased bad debt expense or delays in collecting accounts receivable could have a material adverse effect on cash flows and results of operations. In addition, our ability to access the capital markets may be severely restricted or made very expensive at a time when we need, or would like, to do so, which could have a material adverse impact on our liquidity and financial resources. Certain industries in which our customers do business and certain geographic areas may have been and could continue to be adversely affected by the recession in economic activity.

 

Should we be unable to execute our plans or obtain additional financing, that might be needed if our cash needs change, we may be unable to continue as a going concern. The condensed consolidated financial statements do not include any adjustments that might result from the outcome of these uncertainties.

 

New Accounting Pronouncements

 

In April 2010, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2010-17, Revenue Recognition — Milestone Method (“ASU 2010-17”). ASU 2010-17 provides guidance on the criteria that should be met for determining whether the milestone method of revenue recognition is appropriate. A vendor can recognize consideration that is contingent upon achievement of a milestone in its entirety as revenue in the period in which the milestone is achieved only if the milestone meets all criteria to be considered substantive. The following criteria must be met for a milestone to be considered substantive. The consideration earned by achieving the milestone should be: (1) commensurate with either the level of effort required to achieve the milestone or the enhancement of the value of the item delivered as a result of a specific outcome resulting from the vendor’s performance to achieve the milestone; (2) related solely to past performance and (3) reasonable relative to all deliverables and payment terms in the arrangement. No split of an individual milestone is allowed and there can be more than one milestone in an arrangement.  Accordingly, an arrangement may contain both substantive and non-substantive milestones.  ASU 2010-17 is effective on a prospective basis for milestones achieved in fiscal years, and interim periods within those years, beginning on or after June 15, 2010. We adopted this updated guidance with no impact on our consolidated financial position or results of operations.

 

In September 2009, the FASB issued updated guidance of Accounting Standards Codification (“ASC”) 605, “Revenue Recognition,” for establishing the criteria for separating consideration in multiple element arrangements. The updated guidance is effective for fiscal years beginning on or after June 15, 2010 and requires companies allocating the overall consideration to each deliverable to use an estimated selling price of individual deliverables in the arrangement in the absence of vendor specific evidence or other third party evidence of the selling price for the deliverables. The updated guidance also provides additional factors that should be considered when determining whether software in a tangible product is essential to its functionality. We adopted this updated guidance with no impact on our consolidated financial position or results of operations.

 

29



Table of Contents

 

Item 3.  Quantitative and Qualitative Disclosures About Market Risk

 

No material changes have occurred in the quantitative and qualitative market risk disclosure of the Company as presented in its Annual Report on Form 10-K for Fiscal 2010.

 

Item 4.  Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

As of the end of the period covered by this report, we carried out an evaluation of the effectiveness of the design and operation of our “disclosure controls and procedures” (as defined in Rule 13a-15(e) under the Exchange Act), under the supervision and with the participation of our management, including our Chief Executive Officer and our Chief Financial Officer. Based upon that evaluation, our Chief Executive Officer and our Chief Financial Officer concluded that, as of the end of the period covered by this report, our disclosure controls and procedures are effective. The term “disclosure controls and procedures” means controls and other procedures of the Company that are designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported within required time periods. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

 

Changes in Internal Control Over Financial Reporting

 

Additionally, our Chief Executive Officer and Chief Financial Officer have determined that there have been no changes to our internal control over financial reporting during the three months ended September 30, 2010 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

30



Table of Contents

 

PART II — OTHER INFORMATION

 

Item 1.  Legal Proceedings

 

In December 2001, a purported stockholder class action lawsuit was filed in the United States District Court for the Southern District of New York (the “District Court”) against the Company, two of its then officers, and the underwriters of our initial public offering. The suit purports to be a class action filed on behalf of purchasers of our common stock during the period from June 28, 2000 to December 6, 2000. An amended complaint was filed on April 19, 2002. The plaintiffs allege that the prospectuses for our June 28, 2000 initial public offering and November 16, 2000 secondary offering were false and misleading in violation of the applicable securities laws because the prospectuses failed to disclose the underwriter defendants’ alleged agreement to allocate stock in these offerings to certain investors in exchange for excessive and undisclosed commissions and agreements to make additional purchases of stock in the aftermarket at pre-determined prices. Similar complaints have been filed against hundreds of other issuers that have had initial public offerings since 1998; the complaints have been consolidated into an action captioned In re Initial Public Offering Securities Litigation, No. 21 MC 92. On October 9, 2002, the plaintiffs dismissed, without prejudice, the claims against the named officers and directors in the action against the Company, pursuant to the terms of Reservation of Rights and Tolling Agreements entered into with the plaintiffs (the “Tolling Agreements”). Subsequent addenda to the Tolling Agreements extended the tolling period through August 27, 2010. The District Court directed that the litigation proceed within a number of “focus cases” and on October 13, 2004, the District Court certified the focus cases as class actions. Our case is not one of these focus cases. The underwriter defendants appealed that ruling, and on December 5, 2006, the Court of Appeals for the Second Circuit reversed the District Court’s class certification decision. On August 14, 2007, the plaintiffs filed their second consolidated amended complaints against the six focus cases and on September 27, 2007, again moved for class certification. On November 12, 2007, certain of the defendants in the focus cases moved to dismiss the second consolidated amended class action complaints. On March 26, 2008, the District Court denied the motions to dismiss except as to Section 11 claims raised by those plaintiffs who sold their securities for a price in excess of the initial offering price and those who purchased outside the previously certified class period. The motion for class certification was withdrawn without prejudice on October 10, 2008. On April 2, 2009, a stipulation and agreement of settlement between the plaintiffs, issuer defendants and underwriter defendants was submitted to the District Court for preliminary approval. The District Court granted the plaintiffs’ motion for preliminary approval and preliminarily certified the settlement classes on June 10, 2009. The settlement “fairness” hearing was held on September 10, 2009. On October 6, 2009, the District Court entered an opinion granting final approval to the settlement and directing that the Clerk of the District Court close these actions. On August 26, 2010, based on the expiration of the tolling period stated in the Tolling Agreements, the plaintiffs filed a Notice of Termination of Tolling Agreement and Recommencement of Litigation against the named officers and directors. The plaintiffs stated to the Court that they do not intend to take any further action against the named officers and directors at this time. Notices of appeal of the opinion granting final approval have been filed. Because of the inherent uncertainties of litigation and because the settlement remains subject to appeal, the ultimate outcome of the matter is uncertain, and management believes that the outcome of this litigation will not have a material adverse impact on the consolidated financial position and results of operations.

 

On October 9, 2007, Vanessa Simmonds, a purported stockholder of the Company, filed suit in the U.S. District Court for the Western District of Washington(the “Washington District Court”) against The Goldman Sachs Group, Inc., Merrill Lynch & Co., Inc., and Morgan Stanley, the lead underwriters of our initial public offering in June 1999, and our secondary offering of common stock in November 2000, alleging violations of Section 16(b) of the Securities Exchange Act of 1934, 15 U.S.C. § 78p(b). The complaint sought to recover from the lead underwriters any “short-swing profits” obtained by them in violation of Section 16(b). The suit names the Company as a nominal defendant, contained no claims against the Company, and sought no relief from the Company. Simmonds filed an Amended Complaint on February 27, 2008 (the “Amended Complaint”), naming as defendants Goldman Sachs & Co. and Merrill Lynch Pierce, Fenner & Smith Inc. and again naming Morgan Stanley. The Goldman Sachs Group, Inc. and Merrill Lynch & Co., Inc. were no longer named as defendants. The Amended Complaint asserted substantially similar claims as those set forth in the initial complaint. On July 25, 2008, the Company joined with 29 other issuers to file the Issuer Defendants’ Joint Motion to Dismiss. Simmonds filed her opposition to this motion on September 8, 2008, and the Company and the other Issuer Defendants filed a Reply in Support of Their Joint Motion to Dismiss on October 23, 2008. On March 12, 2009, the Washington District Court granted the Issuer Defendants’ Joint Motion to Dismiss, dismissing the complaint without prejudice on the grounds that Simmonds had failed to make an adequate demand on the Company prior to filing her complaint. In its order, the Washington District Court stated that it would not permit Simmonds to amend her demand letters while pursuing her claims in the litigation. Because the Washington District Court dismissed the case on the grounds that it lacked subject matter jurisdiction, it did not specifically reach the issue of whether Simmonds’ claims were barred by the applicable statute of limitations. However, the Washington District Court also granted the Underwriters’ Joint Motion to Dismiss with respect to cases involving non-moving issuers, holding that the cases were barred by the applicable statute of limitations because the issuers’ stockholders had notice of the potential claims more than five years prior to filing suit. Simmonds filed a Notice of Appeal on April 10, 2009. The underwriters subsequently filed a

 

31



Table of Contents

 

Notice of Cross-Appeal, arguing that the dismissal of the claims involving the moving issuers should have been with prejudice because the claims were untimely under the applicable statute of limitations. Simmonds filed her opening brief on appeal on August 26, 2009. On October 2, 2009, the Company and other Issuer Defendants filed a joint response brief, and the underwriters filed a brief in support of their cross- appeal. Simmonds’ reply brief and opposition to the cross-appeal were filed on November 2, 2009 and the underwriters’ reply brief in support of their cross- appeals were filed on November 17, 2009. On October 5, 2010, the Ninth Circuit Court of Appeals heard oral arguments regarding this matter. A decision is not expected for at least six to 12 months. Management believes that the outcome of this litigation will not have a material adverse impact on our consolidated financial position and results of operations.

 

From time to time, the Company may become subject to additional legal proceedings, claims and litigation arising in the ordinary course of business. Other than the matters discussed above, we are not a party to any other material legal proceedings, nor are we aware of any other pending or threatened litigation that would have a material adverse effect on our business, operating results, cash flows or financial condition should such litigation be resolved unfavorably.

 

Item 1A.  Risk Factors

 

There have been no material changes to the risk factors disclosed in the Company’s Annual Report on Form 10-K for Fiscal 2010 except for the addition of two risk factors and an update to an existing risk factor as set forth below:

 

If we continue to fail to meet all applicable Nasdaq Global Market requirements and Nasdaq determines to delist our common stock, the delisting could adversely affect the market liquidity of our common stock, impair the value of your investment and adversely affect our ability to raise needed funds.

 

Our common stock is listed on the Nasdaq Global Market. In order to maintain that listing, we must satisfy minimum financial and other requirements. On August 23, 2010, we received a notice from the Nasdaq Listing Qualifications Department stating that, for the last 30 consecutive business days, the closing bid price for our common stock had been below the minimum $1.00 per share requirement for continued listing on the Nasdaq Global Market as set forth in Nasdaq Listing Rule 5450(a)(1).  In accordance with Nasdaq Listing Rule 5810(c)(3)(A), we have been provided 180 calendar days, or until February 22, 2011, to regain compliance with the minimum bid price requirement.  In order to regain compliance, the bid price of our common stock must close at $1.00 per share or more for a minimum of ten consecutive business days, at which time Nasdaq would provide written confirmation of our compliance. In the event we do not meet the minimum bid price requirement during the initial 180-day grace period, we may be eligible for an additional 180-day grace period under the Nasdaq listing rules if we meet the listing standards for The Nasdaq Capital Market. We may need to implement a reverse stock split to regain compliance with the Nasdaq listing rules.

 

If we continue to fail to meet all applicable Nasdaq Global Market requirements in the future and Nasdaq determines to delist our common stock, the delisting could adversely affect the market liquidity of our common stock and adversely affect our ability to obtain financing for the continuation of our operations. This delisting could also impair the value of your investment.

 

We have substantial accounts receivable, and increased bad debt expense or delays in collecting accounts receivable could have a material adverse effect on our cash flows and results of operations.

 

We have substantial accounts receivable as evidenced by days sales outstanding, or DSO, of 93 days as of September 30, 2010.  No assurances can be given that future bad debt expense will not increase above current operating levels.  Increased bad debt expense or delays in collecting accounts receivable could have a material adverse effect on cash flows and results of operations.

 

We may not be able to produce our products on a timely basis because of delays in production resulting from issues with our suppliers or the failure to correctly anticipate product supply requirements.

 

Some of our components are currently available only from a single source or limited sources. We may experience delays in production if we fail to identify alternative suppliers, or if any parts supply is interrupted, each of which could materially adversely affect our business and operations. In order to reduce manufacturing lead times and ensure adequate component supply, we enter into agreements with certain suppliers that allow them to procure inventories based upon criteria defined by us. If we fail to anticipate customer demand properly, an oversupply of parts could result in excess or obsolete inventories, which could adversely affect our business. Additionally, if we fail to correctly anticipate our internal supply requirements, an undersupply of parts could limit our production capacity. Our inability to meet volume commitments with suppliers could affect the availability or pricing of our parts and components. A reduction or interruption in supply, a significant increase in price of one or more components or a decrease in demand of products could materially adversely affect our business and operations and could materially damage our customer relationships. Financial problems of suppliers on whom we rely could limit our supply of components or increase our costs. Also, we cannot guarantee that any of the parts or components that we

 

32



Table of Contents

 

purchase will be of adequate quality or that the prices we pay for the parts or components will not increase. Inadequate quality of products from suppliers could interrupt our ability to supply quality products to our customers in a timely manner. Additionally, defects in materials or products supplied by our suppliers that are not identified before our products are placed in service by our customers could result in higher warranty costs and damage to our reputation. We also outsource certain of our components internationally and expect to increase international outsourcing of components. As a result of outsourcing internationally, we may be subject to delays in delivery because of regulations associated with the import/export process, delays in transportation or regional instability.

 

Item 2.  Unregistered Sales of Equity Securities and Use of Proceeds

 

The issuance of equity securities to CPS on July 30, 2010 is described in a Current Report on Form 8-K, that was filed with the Securities and Exchange Commission on August 4, 2010.

 

Item 3.  Defaults Upon Senior Securities

 

None

 

Item 4.  [Removed and Reserved]

 

Item 5.  Other Information

 

None

 

33



Table of Contents

 

Item 6.  Exhibits

 

The following exhibits are filed with, or incorporated by reference into, this Form 10-Q:

 

Exhibit 
Number

 

Description

3.1

 

Second Amended and Restated Certificate of Incorporation of Capstone Turbine Corporation (a)

3.2

 

Amended and Restated Bylaws of Capstone Turbine Corporation (b)

31.1

 

Certification of Chief Executive Officer

31.2

 

Certification of Chief Financial Officer

32

 

Certification of Chief Executive Officer and Chief Financial Officer

 


(a)

 

Incorporated by reference to Capstone Turbine Corporation’s Registration Statement on Form S-1/A, dated May 8, 2000 (File No. 333-33024).

 

 

 

(b)

 

Incorporated by reference to Capstone Turbine Corporation’s Quarterly Report on Form 10-Q for the quarter ended December 31, 2005 (File No. 001-15957).

 

34



Table of Contents

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

CAPSTONE TURBINE CORPORATION

 

 

 

 

 

By:

/s/  EDWARD I. REICH

 

 

Edward I. Reich

 

 

Executive Vice President and

 

 

Chief Financial Officer

 

 

(Principal Financial Officer)

Date: November 9, 2010

 

 

 

35



Table of Contents

 

Exhibit Index

 

Exhibit 
Number

 

Description

3.1

 

Second Amended and Restated Certificate of Incorporation of Capstone Turbine Corporation (a)

3.2

 

Amended and Restated Bylaws of Capstone Turbine Corporation (b)

31.1

 

Certification of Chief Executive Officer

31.2

 

Certification of Chief Financial Officer

32

 

Certification of Chief Executive Officer and Chief Financial Officer

 


(a)

 

Incorporated by reference to Capstone Turbine Corporation’s Registration Statement on Form S-1/A, dated May 8, 2000 (File No. 333-33024).

 

 

 

(b)

 

Incorporated by reference to Capstone Turbine Corporation’s Quarterly Report on Form 10-Q for the quarter ended December 31, 2005 (File No. 001-15957).